What's new
What's new

Furnas J103223 switch

jcollings

New member
Recently purchased this switch on on a site used.
It does not look right as to the contacts for a neutral position forward and reverse, the contacts do not make a good connection by the looks shown. any input on this or people confirming would be greatly appreciated.
pictures attached.
400d30f3f30dcff0f1b258a71d302cba.jpg
d5130028c065cd3b6968edf3acac099e.jpg
a4458bb79cd75f09b45de71b63a14369.jpg
f1c523f5cb64c963a675b31646ccf0b3.jpg


Sent from my SM-G975U using Tapatalk
 

jcollings

New member
Bending the contacts over they still miss the other part of the contact totally. Just pushing them over they will not hit the contact without even bending. so it's perplexing to me I don't know if this was modified or what.
Here's a picture of the same part number switch and it looks like the contacts were taller possibly with a double contact area.
2decd9722707d0ab1ddc44e75b70fded.jpg
3093c06a2208ec26f27bd0c7ef1411b6.jpg


Sent from my SM-G975U using Tapatalk
 

jcollings

New member
Well after further phenagling and bending the center contact down I think I can make it work.

Thank you!

Sent from my SM-G975U using Tapatalk
 








 
Top