empireages
Plastic
- Joined
- Apr 21, 2022
Hi,
We just acquired a bi spindle Spinner TS66L from 2004 with Fanuc 18i-TB
It has XZC axis with B for the secondary spindel + live tooling.
We have added a LNS QUICKLOAD SERVO 65.
Anyone have the manuals for this machine ? we haven't got any with it...
-Is it correct that calling a tool in MDI alarm out if we do 'T0101; M6' but it works without the M6 ?
-How can I see which options are present on the Fanuc ?
-Does the fanuc 18i-tb come with FOCASS for remote supervision ? which software can we use to monitor the lathe ?
-How can I find all the custom G and M codes used by the machine without the manuals ? (needed for part transfer, part ejection, bar feeder...)
-Can we use a PC based MANUAL GUIDE to do the program offline then copy paste them to the lathe ? The lathe Doesn't have MANUAL GUIDE.
-I can simulate a ISO program just fine but a manual guide one alarm out at the first Gcode from MANUAL GUIDE... , is it normal ? can we still run those ?
Thanks in advance, i have 0 support from spinner in france so i hope on your help.
Empireages
We just acquired a bi spindle Spinner TS66L from 2004 with Fanuc 18i-TB
It has XZC axis with B for the secondary spindel + live tooling.
We have added a LNS QUICKLOAD SERVO 65.
Anyone have the manuals for this machine ? we haven't got any with it...
-Is it correct that calling a tool in MDI alarm out if we do 'T0101; M6' but it works without the M6 ?
-How can I see which options are present on the Fanuc ?
-Does the fanuc 18i-tb come with FOCASS for remote supervision ? which software can we use to monitor the lathe ?
-How can I find all the custom G and M codes used by the machine without the manuals ? (needed for part transfer, part ejection, bar feeder...)
-Can we use a PC based MANUAL GUIDE to do the program offline then copy paste them to the lathe ? The lathe Doesn't have MANUAL GUIDE.
-I can simulate a ISO program just fine but a manual guide one alarm out at the first Gcode from MANUAL GUIDE... , is it normal ? can we still run those ?
Thanks in advance, i have 0 support from spinner in france so i hope on your help.
Empireages