What's new
What's new

Hyundai Wia main spindle and sub spindle operation simultaneously

Ankur_113

Plastic
Joined
Jul 18, 2023
Hello people,

I have Hyundai wia HD2200SY with Main spindle, sub spindle and upper turret.
I am machining a part on main spindle then transfer to sub spindle where I finish the part. Now I want to Catch the part from sub spindle through part catcher and while catching the part, I want to start machining new part on main spindle.
I don't how it works or it works or not. can anyone guide me here?
 
Hello people,

I have Hyundai wia HD2200SY with Main spindle, sub spindle and upper turret.
I am machining a part on main spindle then transfer to sub spindle where I finish the part. Now I want to Catch the part from sub spindle through part catcher and while catching the part, I want to start machining new part on main spindle.
I don't how it works or it works or not. can anyone guide me here?
What you're asking for involves a lot of proprietary M codes. You also haven't mentioned what control is on the machine. I know some folk at Hyundai-WIA, you should give them a call. They probably have examples.
 








 
Back
Top