Tommy-D
Aluminum
- Joined
- Jun 9, 2008
- Location
- Union City,Tn
> I'm having a problem getting this part made on our TL-1 for class. The part is a 5.500 long rod,with a .5625 radius on the end,followed by a 1.500 section that is .375 in diameter,the rest of the part is .500 dia. The radius on the end doesn't stop at 1/2 ball,it continues down to the .375 diameter,which is the problem. I have spent the biggest part of 4 days in class,and have yet to figure out how to make it cut a radius on the backside.
I was able to make a part that worked for him,by resetting the Z0 to where the nose radius stops,and plunging in to get the neck down to .375,but the backside of the nose has a chamfer that goes down to the .375 dia,instead of leaving a ball on the end of the part. Any ideas? Tommy D.
I was able to make a part that worked for him,by resetting the Z0 to where the nose radius stops,and plunging in to get the neck down to .375,but the backside of the nose has a chamfer that goes down to the .375 dia,instead of leaving a ball on the end of the part. Any ideas? Tommy D.