Welcome.
Please provide me with the procedure for reloading the backup data after a memory backup battery failure (SRAM etc.). Original data from the manufacturer of the machine - 25MB. This is a CTX CNC lathe from Fanuc 32i (under Windows CE). After inserting the memory card, holding the two extreme buttons under the screen and turning on the machine, Windows CE starts up, and there is a "u" symbol on the Fanuc display and nothing else happens. How to load data from CF / PCMCIA card? The card is formatted as FAT16, it has 128MB. A PC with a PCMCIA connector sees it normally, and Fanuc probably does not, unless I do the procedure wrong.
Can anyone help me?
Please provide me with the procedure for reloading the backup data after a memory backup battery failure (SRAM etc.). Original data from the manufacturer of the machine - 25MB. This is a CTX CNC lathe from Fanuc 32i (under Windows CE). After inserting the memory card, holding the two extreme buttons under the screen and turning on the machine, Windows CE starts up, and there is a "u" symbol on the Fanuc display and nothing else happens. How to load data from CF / PCMCIA card? The card is formatted as FAT16, it has 128MB. A PC with a PCMCIA connector sees it normally, and Fanuc probably does not, unless I do the procedure wrong.
Can anyone help me?
