Leblond Makino FNC manual

[LeeG]

does anyone know if they wrote an ATC operators manual or an ATC maintenance manual for the tool changer on a FNC106.
these other FNC models probably have a similar tool changer.....
FNC40
FNC60
FNC74
FNC156
FNC128
FNC1210

 

[dandrummerman21]

That's obviously a pretty old machine. But have you asked makino if they have manuals?

 

[LeeG]

i did reach out and ask about support for this machine and was forwarded maintenance contract documents.
I'll try asking specifically about an ATC manual

 

[Chainjibbs]

We have a Leblond makino a55.
I’ll check soon and see what all manuals we have!

 

[dandrummerman21]

i did reach out and ask about support for this machine and was forwarded maintenance contract documents.
I'll try asking specifically about an ATC manual

Yeah, hard to pay their maintenance fee only to find out they don't have what you need!

If they won't confirm they have the manual before paying for maintenance, that'd be pretty shitty

 

[LeeG]

thanks guys