LEMPCO Press

[Happy Harry]

Lemco diagrams

After a long search - I found the diagrams for the pump -
If your interested, drop me a line and I 'll send you copies

Rich

Have 40 ton my work was going to scrap . Got seal kit along time ago from Kwik-Way manufacturing . Now in rebuild mod . Please send me diagrams . Thanks Harry

 

[Happy Harry]

Got my seal kit from Kwik- Way . Need diagrams . Thanks

 

[Rlm4451]

I would be very interested in any help and diagrams with a Lempco 60 ton press.

 

[Uwila]

Aloha, I have a 60 Ton Lempco hydraulic press model 400-A. I am kindly seeking a parts diagram or manual that would help me to understand how to install a repair kit that I purchased online. It comes with six ball bearings and a few other items that I need to understand how it all fits back together.

With much appreciation

-Uwila

 

[DiyResto]

Hello all, working on a model 400A-60ton , pump is needing a rebuild hoping to get ahold of the parts diagram for this if anyone can help!

 

[Rlm4451]

Diagrams for Lempco press

After a long search - I found the diagrams for the pump -
If your interested, drop me a line and I 'll send you copies

Rich

I really need a diagram for my Lempco Press. Thank you for offering to share them. If you could please send me a copy, it would be greatly appreciated. Thank you

Rick
email [email protected]

 

[altmt1]

Can you please email me the Lempco pump diagrams and any manual for a 400A? [email protected]

 

[Buzzshoney]

Did anyone ever figure out the Lempco press? I just started to rebuild one…

 

[Buzzshoney]

I could use them, but can’t figure out how to get ahold of you

 

[Fear624]

I know this is an old thread, but I’ve got an old 50-ton Lempco press that is missing parts to the hand pump. I’ve already got an SPX electric pump on the way to plumb in. I’m just curious what the 1/8” hardline from the bottom of the cylinder back to the hand pump
Is for.
The 3/8” line to the top is the pressure line and the return springs on the sides of the cylinder say it’s a single action cylinder.
I just want to know if I need to just let this line vent of plumb it as a return to the reservoir.

 

[Garwood]

I know this is an old thread, but I’ve got an old 50-ton Lempco press that is missing parts to the hand pump. I’ve already got an SPX electric pump on the way to plumb in. I’m just curious what the 1/8” hardline from the bottom of the cylinder back to the hand pump
Is for.
The 3/8” line to the top is the pressure line and the return springs on the sides of the cylinder say it’s a single action cylinder.
I just want to know if I need to just let this line vent of plumb it as a return to the reservoir.

It's a vent between the piston and gland seals. Single acting cylinders still have gland seals.

Why not fix the hand pump? I have a 60 ton Lempco and the hand pump is awesome. Way faster than a small single stage 7000 PSI electric pump.