I have a Lodge and Shipley powershift with the hydraulic gear shifters. I am having issues with the individual shifters inside the headstock not shifting from low to high gear.Anyone have an idea of where to get parts if possible?
I have a Lodge and Shipley powershift with the hydraulic gear shifters. I am having issues with the individual shifters inside the headstock not shifting from low to high gear.Anyone have an idea of where to get parts if possible?
The 24v contact block is checking good on all the individual contacts, but i think the hydraulic manifold that gets the signal from the block is the issue. This is one of those designs that looks good, but is destined to fail after some years of wear. I am the maintenance manager over a shop with 12
manual lathes ranging from 1948-1976 with the shortest bed we have just under 20'. The L and S I'm referring to is a Model 80 made in '76. This is a very heavy duty lathe and it runs well accept for the gear change mechanism.
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.