I have a 2001 vintage Nishijimax NHC 150H I purchased, non-working, that I am trying to get up and running again. It has a Mitsubishi Melsec A1SH (MELSEC A) PLC that seems to have been corrupted. I tried to pull the program off the machine and it has large sections of gibberish among sections that look to be intact.
I have been trying to work with the USA representative for Nishijimax but they haven't offered any actual options to get the saw back into operation. I will continue to try and work with them, just looking for other options at the same time.
If anyone out there has a saw from a similar vintage, I'd like to get a copy of your PLC program and parameters. I can certainly compensate you for your time.
I have been trying to work with the USA representative for Nishijimax but they haven't offered any actual options to get the saw back into operation. I will continue to try and work with them, just looking for other options at the same time.
If anyone out there has a saw from a similar vintage, I'd like to get a copy of your PLC program and parameters. I can certainly compensate you for your time.