Erich
Hot Rolled
- Joined
- Apr 4, 2017
- Location
- Poway, CA (from Location field)
Okay I have a need to modify qty 1 of a 4 inch PVC Elbow fitting.
Fittings are all designed to work with Schedule 40 wall thickness pipe.
For this application I am using thin walled pipe and I need the ID of the fitting to be opened up about .18 inches. What tool will work around the inside of the elbow?
Accuracy is not high +- 1/16 inch would be plenty good. I just need to open it up to create clearance for the end fitting on the stinky slinky in my RV.
I am envisioning something like the old flex hone with the spring mounted abrasive balls. But that is not right for plastic and I have a lot to take off.
Extrude honing would probably work. Any other suggestions?
Fittings are all designed to work with Schedule 40 wall thickness pipe.
For this application I am using thin walled pipe and I need the ID of the fitting to be opened up about .18 inches. What tool will work around the inside of the elbow?
Accuracy is not high +- 1/16 inch would be plenty good. I just need to open it up to create clearance for the end fitting on the stinky slinky in my RV.
I am envisioning something like the old flex hone with the spring mounted abrasive balls. But that is not right for plastic and I have a lot to take off.
Extrude honing would probably work. Any other suggestions?