Looking for OD jaws for CUSHMAN 3507.

[gregudolph]

Hello,
I have a CUSHMAN 3507 Chuck with ID jaws. I’m looking for a set of OD jaws. I know CUSHMAN is long gone so I’m hoping someone here has a set or can point me in the right direction to purchase a new set. I’ve attached pictures of my Chuck and current jaws for reference.
Thanks,
Greg

 

[CWC(4)]

A few dimensions/measurements of the jaws might help. Esp. the overall width and the depth and height of the slots in the sides of the jaw. A picture with a scale next to the teeth that engage with the scroll would help too.
What's the diameter of the chuck?

 

[gregudolph]

A few dimensions/measurements of the jaws might help. Esp. the overall width and the depth and height of the slots in the sides of the jaw. A picture with a scale next to the teeth that engage with the scroll would help too.
What's the diameter of the chuck?

Sorry it took a while. Attached are some pictures of my current jaw dimensions.

 

[gregudolph]

Also, it is a 7 1/2” Chuck.

 

[acme thread]

I think I have a set that will work for you, Marked CCCo, 1,2,&3,
.8375" thick. #1 jaw has 9 bottom teeth;#2 & 3 both have 8 teeth.
Center {WEB] measures .421".
Length of #1 measures2.962"
You can have them for small flat rate postage, They're in excellant condition. Switch over to a Private message if interested,for personal information. Dave [ACME THREAD]

 

[gregudolph]

Dave,
I tried sending you a private message and it wont let me. Hopefully you can send me one and I can reply. Thanks!
Greg

 

[CWC(4)]

The very reason I suggested posting dimensions. Hope those work out for you, very generous of Acme Thread to offer them.
The set I had in mind (pictured below) are slightly smaller in every dimension, .723 wide, 2.640 long with a .302 slot height by .144 depth.

 

[acme thread]

Dave,
I tried sending you a private message and it wont let me. Hopefully you can send me one and I can reply. Thanks!
Greg

 

[acme thread]

Cushman jaws are in the mail 4/20/23 as of 10:49 AM, Gal in the PO. said to watch for delivery on Monday. [I'm not sure how many Mondays are left in 2023} dave [acme thread].
Post was $10.20. I'll send tracking info By the Conversation Thingy dave [acme thread

 

[acme thread]

Gregudolph, I got your check for postage today 5/8/23, Thanks for being honest. Dave , [Acme thread]

 

[gregudolph]

My pleasure Dave. I really appreciate the jaws. They work fantastic!