Material FS: Brass & Inco 718

[npok]

I have ~90 lbs of brass plugs that were used in rubber molding. Don't know the specific alloy, and they are all different lengths.

$100 OBO


I also have a piece of 718 Inconel, no certs. Min OD is 4.375, max is 4.800, OAL is 5.830. Weighs ~34 lbs.

$100 OBO


I'll take Paypal, cashier's check or MO. Will be shipped USPS.

Nik

 

[mpmar_bt]

Hi Nik,

Consider splitting up the brass? If so what would you want for a medium flat rate box full?

 

[npok]

Hi Nik,

Consider splitting up the brass? If so what would you want for a medium flat rate box full?

PM sent (10 char)

 

[MichaelP]

What's the approximate size of the brass plugs? How many of them can you stuff into a medium and large Priority Mail boxes, and what will they cost?

Thanks.

 

[labeeman]

What's the approximate size of the brass plugs? How many of them can you stuff into a medium Priority Mail box, and what will they cost?

 

[MichaelP]

I just noticed a rule in the container. I hope it's a 24" one.

The rule graduations are hard to see, but it looks like the plugs are about 1.750"- 2.000" L by about .400-.500" in diameter at the large end. Not sure though. A small Priority Mail box may be of interest in this case.

 

[aerodark]

Sure that isn't bronze? Or has my senility progressed?

 

[npok]

UPDATE: ~40 lbs of brass remaining.

Yall are right, the plugs are ~.500 x ~.750-1.750. It's a 6" rule in there.

IIRC I was told brass. I'm posting some comparison pics...the slug is 360 brass & the filed areas look pretty similar to me.


Nik

 

[aerodark]

UPDATE: ~40 lbs of brass remaining.

Yall are right, the plugs are ~.500 x ~.750-1.750. It's a 6" rule in there.

IIRC I was told brass. I'm posting some comparison pics...the slug is 360 brass & the filed areas look pretty similar to me.
View attachment 204599View attachment 204600View attachment 204601

Nik

Cylindrical Square and Comparator Stand sold to cpifer3.

Thanks!

Probably the lighting. Sorry!

Sent from my Nexus 6P using Tapatalk

 

[MichaelP]

So what's the cost of medium and small Priority Mail boxes filled with the brass?

 

[npok]

Probably the lighting. Sorry!

Sent from my Nexus 6P using Tapatalk

NP man.

So what's the cost of medium and small Priority Mail boxes filled with the brass?

A med flat rate will hold the remaining 40 lbs so it'd be $49 shipped. I believe a small flat rate will hold ~10 lbs, so $16 shipped (pending actual amount shipped).

Nik

 

[MichaelP]

I'll take a small box please. Waiting for your Paypal ID and the corrected total.
Thanks.
Mike

 

[npok]

UPDATE: ~25 lbs of brass plugs left.

Nik

 

[mpmar_bt]

Just got my box today. Apparently it went via California to Virginia and arived the single most battered box I have ever seen. But the tape held and all is good with my new lifetime supply of small brass.

Thanks nik

 

[npok]

Just got my box today. Apparently it went via California to Virginia and arived the single most battered box I have ever seen. But the tape held and all is good with my new lifetime supply of small brass.

Thanks nik

Wow, stuff that gets shipped to me seems to go around the whole country too Glad it got there in one piece!

Nik

 

[hcmachine]

I'll take the last 25lbs. Please send PayPal info.

 

[npok]

I'll take the last 25lbs. Please send PayPal info.

Clear out your inbox please.

Nik

 

[hcmachine]

There was only 15 messages, it can't be full. It's supposed to be full at 50- right? I emptied it anyway, please send the PayPal info.
Thanks

 

[npok]

There was only 15 messages, it can't be full. It's supposed to be full at 50- right? I emptied it anyway, please send the PayPal info.
Thanks

Don't know what the deal was, that's just what it said earlier. Anyways, PM sent.

Nik

 

[hcmachine]

I don't know either, but your pm was received and PayPal sent. Thanks, Nik!