Mazak 10N ATC-MC parameters - recovery

[sheydasofia121]

Here is my parameters.
But I am still wondering about the Swedish language in your machine

You did ask for parameters for in a thread of QT10ATC so that is what you got.
What page is missing?
Why dont you want to answer why the machine language is Swedish?
Where is this machine located?

machine is currently in Iran
The device was bought by my friend from Sweden and I have not changed the language yet

 

[sheydasofia121]

You did not send me the D series of parameters (parametrar ALT.).
Thank you for taking a picture of that page.
There are many of this series of machines in your country.
If I don't get results, I have to tell my friend to meet you in person.

And yes, a lot of parameters need to be adjusted to your machine, these are only something to start with.

 

[sheydasofia121]

I am so confused
Here is my control profile
I hope the problem is solved

 

[sheydasofia121]

I am so confused
Here is my control profile
I hope the problem is solved

View attachment 390909

 

[benganboll]

I dont think there is many of these in Sweden but I have 3 of them. (2 in production and 1 for spares)
Do you have eproms to change language?

I think the parameter page you are talking about will go away when you enter the parameters I sent you.
I have seen that page before on my machine aswell but now I only have 3 pages.

To enter the OP parameters you need to add a parity number by counting all the "1" like this:
1010 0000 = 101000002
1111 1111 = 111111118
1110 0000 = 111000003

 

[sheydasofia121]

من فکر نمی کنم از این تعداد در سوئد زیاد باشد اما من 3 تا از آنها دارم. (2 در تولید و 1 برای قطعات یدکی)
آیا برنامه هایی برای تغییر زبان دارید؟

من فکر می کنم صفحه پارامتری که شما در مورد آن صحبت می کنید با وارد کردن پارامترهایی که برای شما ارسال کردم از بین می رود.
من قبلاً آن صفحه را در دستگاه خود دیده بودم اما اکنون فقط 3 صفحه دارم.

برای وارد کردن پارامترهای OP باید یک عدد برابری را با شمارش تمام "1" به این صورت اضافه کنید:
1010 0000 = 101000002
1111 1111 = 111111118
1110 0000 = 111000003

دوباره سلام
بعد از چند روز تلاش به نتیجه رسیدم.
پارامترهای دستگاه شما با من مطابقت داشت.
فقط یک صفحه از آن پارامترها وجود ندارد.
شما صفحه پارامتر کاربر را برای من ارسال نکردید.
برای دسترسی به آن صفحه در قسمت پارامتر در صفحه سوم عدد 1131 را وارد کنید تا صفحه پارامتر کاربر باز شود.
سپس عکس آن صفحه را برای من ارسال کنید
متشکرم

 

[sheydasofia121]

I dont think there is many of these in Sweden but I have 3 of them. (2 in production and 1 for spares)
Do you have eproms to change language?

I think the parameter page you are talking about will go away when you enter the parameters I sent you.
I have seen that page before on my machine aswell but now I only have 3 pages.

To enter the OP parameters you need to add a parity number by counting all the "1" like this:
1010 0000 = 101000002
1111 1111 = 111111118
1110 0000 = 111000003

In the order of the photos, in the parameters section, first press the button that I showed in the photo, then enter the number 1131 as in the second photo and press the input button, then when you press the sida button, two more parameter pages will be added to the pages according to the image.

 

[sheydasofia121]

I dont think there is many of these in Sweden but I have 3 of them. (2 in production and 1 for spares)
Do you have eproms to change language?

I think the parameter page you are talking about will go away when you enter the parameters I sent you.
I have seen that page before on my machine aswell but now I only have 3 pages.

To enter the OP parameters you need to add a parity number by counting all the "1" like this:
1010 0000 = 101000002
1111 1111 = 111111118
1110 0000 = 111000003

You will definitely help me a lot by sending this information.

 

[Philabuster]

View attachment 391281View attachment 391282View attachment 391283View attachment 391284
In the order of the photos, in the parameters section, first press the button that I showed in the photo, then enter the number 1131 as in the second photo and press the input button, then when you press the sida button, two more parameter pages will be added to the pages according to the image.

The 10N ATC/MC machine does not use those extra hidden parameters. Clear all of those parameters and the machine will run just fine.

 

[sheydasofia121]

The 10N ATC/MC machine does not use those extra hidden parameters. Clear all of those parameters and the machine will run just fine.

How do I delete?
Can I leave 0?
What should I do about changing the language to English?

 

[Philabuster]

How do I delete?
Can I leave 0?
What should I do about changing the language to English?

Make them 0.
I do not know how to change the machine language.

 

[benganboll]

What should I do about changing the language to English?

You change 2 eprom chips.
I can provide you with this but I need to know if you have the FX784-8 and FX784-9 or the newer FX884.