Mazak QT15n hydraulic oil change

[Zebovsky]

Hello again

I am planning to change the hydraulic oil on my Mazak QT15n lathe.

On the Internet, I found information that the oil I need is Mobil DTE24. However, I do not know what the capacity of the tank is (I bet 32 liters).

Should I clean the filter when replacing it? If so, where is it and how to get to it.

In the attachment I am sending a photo of the pump with the tank.

Greetings from Poland,
Sebastian

 

[M K]

You will need 40ltrs as I replaced my oil and bought 2 of the 20 litre drums and only had a bit left so around 35 litres is a good guess

I couldn’t see any obvious filter so I just changed the oil