Mazak T-2 parameter list

[mada87]

Does anyone have a list of the parameters on a T-2 control? I have a QT-28 with a T-2 with lost parameters, even if you have a different machine but with a T-2 control I would be interested in a parameter list as a starting point. I do actually have a few of the parameter but am missing several at the end. I can post screenshots of the missing pages tomorrow.

Thanks,
Mada87

 

[Pete Deal]

PM me your email address and I will email you screen shots of my QT15 parameters.

 

[mada87]

PM sent, not sure if it worked though. Thanks Pete

 

[noname777]

Does anyone have a list of the parameters on a T-2 control? I have a QT-28 with a T-2 with lost parameters, even if you have a different machine but with a T-2 control I would be interested in a parameter list as a starting point. I do actually have a few of the parameter but am missing several at the end. I can post screenshots of the missing pages tomorrow.

Thanks,
Mada87

you still have to fine tune all parameters. Show us what you are missing QT15 and QT28 might be absolutely different in servo amps, spindle controller type. barriers, turret specification, tail stock size and so on. You cant just take someone else parameters.

 

[Simple Machinist]

Is there a guide to parameters so you know what they apply to? Some of mine are defined in the electrical drawing set, but many are not.

 

[noname777]

sure, there is a parameter book, where every parameter is explained, only OPTIONS parameters arent , cause these are Mazak special parameters. They never let people know them. that is why I am asking you what you are missing. So we can calculate them

 

[M K]

sure, there is a parameter book, where every parameter is explained, only OPTIONS parameters arent , cause these are Mazak special parameters. They never let people know them.

Hi, sorry to dig up and old post but found this during a search

Does anybody have a copy of the ‘parameters book’ with the explanations?

I have a QT15N and the machine is working fine, I have the electrical book with some parameter descriptions but I’d love a copy of the book to see what all the other machine parameters and user parameters relate to

Many thanks
Marc

 

[benganboll]

Check section 10 of MazakQT10N1986OperatingManual_T2.pdf

http://hagstromsystems.se/_Files/MazakQT10N1986ElectricWiringDiagram.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986MaintenanceManual_QT10N.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986OperatingManual_T2.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986OperatingManual_ToolSetter.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_EIA-ISO.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_T-2PracticalUse.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_T-2Primer.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ToolingManual.pdf

 

[M K]

Thanks,

That explains 99% of them for me

Marc

 

[bdrotau]

Here are some qt20n params. Special options are not so hard to determine and are described in a qt10n electronic schematics book. Is somewhere on this forum.
Just take care at tool eye, turret size, chuck size and tail stock. Using the book it will help you understand these parameters. Good luck.

Trimis de pe al meu SM-J530F folosind Tapatalk

 

[ricardo saul garcia]

alguin que tenga los manuales de un torno mazak 15ms