Micrometers, drills, taps, lots of misc. More than 200 pictures of things that could be yours :)

[lazz]

As usual I dont care about payment.... Mail me a check.... paypal ...what ever you wanna do works for me.
First dibs are awarded to the first post. Send a follow up PM and tell me how you wanna pay and Ill get you the necessary details.

Shipping.... Everything will be plus shipping....Im sending this via USPS flat rate boxes.... The cheapest rate possible....



Picture #1

https://imgur.com/a/a0yzZeb

A)<<SPOKEN FOR>> Mitutoyo 0-6" .0001 This is a nice lightly used set. The standards were never used. The box shows shelf stains. $425
B)<<SPOKEN FOR>> Mitutoyo 0-3" mechanical digital to .001 on the counter & .0001 on the thimble. the set has been used but works well. $130
C) <<SPOKEN FOR>>Mitutoyo disguised as a Craftsman 0-1 .00005 it has a new battery $45
D)<<SPOKEN FOR>> Mitutoyo 3-4 mechanical digital to .001 on the counter & .0001 on the thimble. the back seems to have something stuck on it. Maybe the plastic was glued at some point. In the 10 or more years it was used here there was never any problem. $50
E) <<SPOKEN FOR>>NSK 4-5 mechanical digital to .001 on the counter & .0001 on the thimble, Like new $60

Picture #2

https://imgur.com/a/g5ppHhE

A) Mitutoyo 0-1 .001 103-127 $10
B) <<SPOKEN FOR>>Mitutoyo 0-1 .0001 103-250 $12
C) <<SPOKEN FOR>>Mitutoyo 2-3 .0001 103-217 $20
D) <<SPOKEN FOR>>Mitutoyo 3-4 .0001 Missing plastic on the back $20
E) Mitutoyo 4-5 .0001 $25
F&G) B&S 1-2 .001 $5
H) Reptil 0-25 mm $5
I) Central tool 3-4 .001 $5
J)<<SOLD>> B&S 570 13" $20
K) <<SPOKEN FOR>> Starrett 1-2 .001 $5
L) B&S 1-2 .001 $5
M) B&S 607 0-1 $5
N) Lufkin 0-1 .001 $3
O) 3.5 x 8.25 glass magnifier with chips and all $10
P&Q&R) working 0-1" $3


Picture #3

https://imgur.com/a/zWUYByb

These indexes are filled with a combination of used and sharpened or new drills. Some of the used drills do have some shank abuse.
B) <<SOLD>>Nice brass or bronze numeric 1-60 index with new drills $75
C) 1-60 Protool index $30
D&E&F) 1-60 $30 each
G) <<SOLD>>
H)<<SOLD>> 1-60 pins $25
I&J&K&L&M) <<ALL SPOKEN FOR>>1/16" to 1/2" $20 each
N) 1/16" to 1/2" reduced shank short than jobber $20
O) <<SOLD>>1/16" to 1/2" screw length $20 each
Q) <<SOLD>>left hand drills and extractors. 3/8 drill is screw length. #3 extractor end is broken and a couple extra extractors. $20
T) <<SPOKEN FOR>>Letter drills $25 each
S) <<SOLD>>
U) 1/16" - 1/4" $5 each

Picture #4

https://imgur.com/a/bwQUbQm

A) <<SOLD>>counter sinks $5
B) <<SOLD>>8 starter drills $5
C) <<SPOKEN FOR>>100 + small drills, 2 pin vises and a metal tube to hold it all.. all smaller that 1/8 $12
D)<<SOLD>>25+ Files $15
E&F) <<ALL SPOKEN FOR>>20+ center drills $10 each
G) 20+ drills with custom step features $15
H) 10+ drills with counter bore or sheet metal features $5
I) 9 large screw drills $7.50
J&K&L) 30+ longer used drills $15 each
M) <<SOLD>>10+ longer used drills the big on is 7/16 $10
N)<<SPOKEN FOR>>
O) 20+ larger drill most were recently sharpened. $25 each pile.



Picture #5

https://imgur.com/a/BCHC82V

A) <<SPOKEN FOR>>Like new Fowler 52-440-612 Bevel Protractor Like new $40
B) <<SPOKEN FOR>>Starrett 456-a with stains works well.. $175
C) <<SPOKEN FOR>> Starrett 25-441 .001 It was sticky all pf a sudden... could be the cold Phoenix weather. $5
D) <<SPOKEN FOR>>BK Sweeney .001 to .400 works well $10
E) <<SPOKEN FOR>>Federal .001 works $5
F) <<SPOKEN FOR>>Areospace (china) like new .0005 $10
G) <<SPOKEN FOR>>Testmaster .ooo1 $25
H)<<SPOKEN FOR>> 2 Mag bases $7.50
I) <<SPOKEN FOR>>A collection of troubled indicators.... $5 for all of them
J)<<SPOKEN FOR>> 3 indicator based $10
K)<<SPOKEN FOR>> Starrett 709A like new $75
L) <<SPOKEN FOR>>2 mag bases $12
M)<<SPOKEN FOR>> 2 mag bases $10
N)<<SPOKEN FOR>> Central tool dial bore gauge unused $30

 

[lazz]

Picture #6

https://imgur.com/a/5p1zKug

A) ??? new in the box... but what is it for? $7.50
B&C) <<SPOKEN FOR>>
D) 10 + ( I think) keys $7.50
E) <<SPOKEN FOR>>No name 4 1/2 clamp $5
F) <<SOLD>>No name planner gauge $10
G)<<SPOKEN FOR>> New unused USA made 1/4" letters $10
H) <<SOLD>>Protractor $1
I) 1/4x20 go& no go, 5/16x 24 go& no go, 1/2 x 20 go & no go, 12x24 no go. $15
J) <<SPOKEN FOR>>2 very used diamonds in a holder $5
K) It does not work... buy something and its yours
L)<<SOLD>>no name 3x4 square $2
M)<<SOLD>> B&S Acme thread gauged $8
N)<<SPOKEN FOR>> NO Name USA acme thread gauged $12
O) <<SPOKEN FOR>>Reed & GSK form tools Knurls $50 for them all
P) Bridgeport #2 boring head with an R8 shank $75
Q) R8 shank with a weight $5
R) Starrett 289A $10
S) USA made radius gauged 17/64" to 1/2" $10
T)<<SPOKEN FOR>> 6 Non barking dogs. $20
U&V) <<BOTH SOLD>>Craftsman $4 each
W)<<SOLD>> Snap on sparkplug adjustment pliers $5

Picture #7

https://imgur.com/a/lOZjGQY

A) <<SOLD>>Socket head screw removers for those striped out socket headeds $5
B) <<SPOKEN FOR>>14 new carbide drills $20
C) <<SPOKEN FOR>>25+ thread chasers some as big as 1 1/4" $25 for all of them
D) <<SOLD>> 25 extraters $20
E) <<SPOKEN FOR>>15 extraters $10
F)<<SPOKEN FOR>> 13 extraters $5
G)<<SPOKEN FOR>> 5 new 3/8 X 4 carbide drill $ 7.50
H) <<SPOKEN FOR>>9 used and new carbide drills $5
I) <<SPOKEN FOR>>3 pounds misc pins $7.50
J)<<SPOKEN FOR>> 5 pounds misc pins $10
K) <<SPOKEN FOR>>9 pounds misc pins $15
L) <<SPOKEN FOR>>6 pounds misc pins $10
M)<<SPOKEN FOR>>20+ extractors $10
N&O) 4 new carbide drills 3/8X4, 3/8 X 6 two times, 7/16X 6 $5 each pile



Picture #8

https://imgur.com/a/qxMBqbr

A & B & C & D & E & F) Measured to the shoulders if there is one $15 each
G)<<SPOKEN FOR>> MT # 4 dead center $10
H) MT # 4 dead center $20
I) Many spline broach .824 at the big end 7 1/2 long $5
J) 1 3/4 ish range 14" long $20
K) 1 1/4 ish range 19 plus inches long $20
L) 1" adjustable $5



Picture #9

https://imgur.com/a/5NQ30MH

>>ALL SOLD>>

<<SOLD>>$5 each for the grinder wheels.

<<SOLD>>A& B& D &E &G times 2 &H &J times 2)
<<SOLD>>C& F& I times 2) these 4 stones have the same profile as the picture for F
K)<<SOLD>>3 used wet stones $20 for all




Picture #10

https://imgur.com/a/F7G6xTI

A & B) 7 tap handles $12.50 per pile
C & D & E & F & G & H) 25 + taps not much larger that 1/2" $7.50 per pile
I) <<SOLD>>1/2 to 3/4 taps $7.50
J) 4 .864 X 27 taps $5
K) 13 dies and a handle 4x 40,8x32, 10x32, 10x24, 12x24, 1/4x20, 1/4 x28, 5/16X24, 5/16X18 , 3/8x16 , 3/8x 24,1/8 NTP , 1/2x13 $20
L) 2x64, 3x48, 4x40, 5x44, 6x32, 8x32, 10x24, 10x32, 12x24, 1/4x20, 1/4 x28, 5/16X18, 5/16X24 , 3/8x16 , 3/8x 24, 7/16x14, 7/16x20, 1/2x13, 1/2x20 1/8 NTP, 1/4 NTP, 1/2 NTP and a storage tube $30
M) 5@1/8 NTP, 13@ 1/4 NTP, 3@3/8 NTP, 2@1/2 NTP, 4@3/4NTP, 1 1/14 NTP
All 27 for $20
N)<<SPOKEN FOR>> 3/4X10 to 1 3/8x8 15 taps for $15 There are 16 pictured I kept one.

 

[BuffDan]

Picture #9, I'll take all the wheels and stones
PM sent

 

[ksimolo]

5D,F and 6B,C,D,G,T
Thanks,
Ken

 

[Andrew_S]

I'll take picture #3, item A, & H, & T.

Picture #5, item K.

 

[crrmeyer]

3a 3o 4a 4b 6f 6h 6u 6v 6n 7a 7d 2j 3r 3v 3p 6L

Thanks

 

[matthewlee]

Well done on putting the ad together. I like how the pics are.

 

[SteveM]

I'm interested in
3Q) left hand drills and extractors. 3/8 drill is screw length. #3 extractor end is broken and a couple extra extractors. $20
7E) 15 extraters $10
6O) Reed & GSK form tools Knurls $50 for them all

Steve

 

[Rob F.]

Interested in if still available:
Pic 4 C&E ,
Pic 5, A,C,E,F,G,I,J,K&M
Pic6 E,J&T
Pic10,I - 1/2to3/4 taps

Edit: 5K and 6T look to be spoken for , I still want if they become avail

 

[jkopel]

7-B,F,G,H,I,J,K,L
(stepping away from the keyboard to take a breath )
Thanks

 

[jwmelvin]

1C
5H
5L

Thanks

 

[MrStretch]

I would like pic 5G
What is included? Can I also buy a mag base that works with this indicator?

Thanks.

Edited to fix pic # typo

 

[mattthemuppet]

6a is a drill sharpener to use on the side of a bench grinder wheel. They work pretty well for what they are

 

[lazz]

6a is a drill sharpener to use on the side of a bench grinder wheel. They work pretty well for what they are

Sorry that was an attempt at humor...
LIke 6T the non-barking dogs.

 

[lazz]

Well done on putting the ad together. I like how the pics are.

Thank you. The pictures are the easy part of a sale.
Now I have to put the stuff in the correct box and hope I mail it to the right guy.

 

[lazz]

I'll take picture #3, item A, & H, & T.

Picture #5, item K.

Tank you for the interest .
You might notice there is no 3A in the list.
It sold before this was posted.
I will check on the availability of the other 2 items after our morning trip to the dog park.

Thanks again Ron

 

[jhov]

Interested in 1B, 1D, 1E, 2B, 5N, 6G

 

[Andrew_S]

Tank you for the interest .
You might notice there is no 3A in the list.
It sold before this was posted.
I will check on the availability of the other 2 items after our morning trip to the dog park.

Thanks again Ron

Ron, how about 3B instead of 3A? Thank you.
Andrew

 

[mjr6550]

I have not had time to digest all this, but so far here is what I would take (if available).
#2 B,C,D,K
#6 E,T
#7 C,G,H, J,K,orL (any one of the 3)
#8 G
I will send a pm after looking further. Thanks.

 

[mjr6550]

Adding to my list, as available,:
#3 I, J, K, L,M
#4 N
#5 E,F,H,J
#10 am I missing something? Does not seem like all the letters are listed.
Where not available, I would take something similar.
Thanks