What's new
What's new

Mitsubishi DWC

Ombodi

Plastic
Joined
Sep 19, 2017
Hello colleagues,
I would like to ask for help.
I have a DWC 90C wire EDM machine.
Would you like to know if your part is compatible with the DWC 90C?
Thanks for the answers.

If the parts cannot be used, I will sell them. I have a lot of parts.
How do I advertise or even post here in this post?

I'd like help inserting a picture, I've done it a long time ago and I don't remember how.
 

mymachinery

Aluminum
Joined
Apr 4, 2007
Location
McBEE, SC
What part of the world are you in?
I don't know if listing in this section is allowed, but if it isn't perhaps a notice that you are listing them in a different place?
But anyway, you would need to list the year of the machine, ser# etc and if it was running 100% when dismantled, the circuit board numbers or other designations, etc.
Apparently even the same model designation could have slightly different pcb revisions with different ic chips. So even if the pcb is functional, it might not work correctly in every machine. With the FW01 pcb, the eprom chips have to be compatible with the system loading disk of the new machine, otherwise you will not be able to load disk. In any case, I do have some interest in parts
 

Ombodi

Plastic
Joined
Sep 19, 2017
Hy mymachinery,
I live in Hungary.
I also think you can’t just use a few parts.
I decided to sell the parts instead.
 

Ombodi

Plastic
Joined
Sep 19, 2017
Á!!!,
Hello!!
I remember now! Good to hear from you again!
I hope you and your family are great and have avoided the covid.

Can you tell me how I can insert a picture?
 








 
Top