What's new
What's new

Monarch 16 CW Metal Lathe -7.5hp 3 phase - 18.5” x 78" - $2000

alcro1998

Aluminum
Joined
Nov 10, 2020
Location
Central Ohio
I am looking to sell a Monarch 16 CW Lathe. The lathe is in good shape. Little wear on the ways and the headstock gears are in great shape. Everything works on it and it is ready to go. I do not have it under power currently since I don't have enough power in my shop. I might be able to get it under power if you really need to see it run but would be kinda tricky. I will clean up the machine a bit more and post some better pictures if I get the chance. It was removed from a machine shop that closed.

18.5" Swing
78" Between Centers
Taper attachment
15" 4 jaw chuck (not pictured)
7.5hp Motor

I am asking $2,000 for the machine.

I am able to load onto just about any trailer with a gantry crane or forklift. I can also deliver the machine and unload it at your location if needed.

If you have any questions please feel free to ask!

Located in Newark, Ohio
 

Attachments

  • 1.jpg
    1.jpg
    115.2 KB · Views: 71
  • 2.jpg
    2.jpg
    135.5 KB · Views: 67
  • 3.jpg
    3.jpg
    121.5 KB · Views: 49
  • 4.jpg
    4.jpg
    165.4 KB · Views: 50
  • 5.jpg
    5.jpg
    143.4 KB · Views: 48
  • 6.jpg
    6.jpg
    100.3 KB · Views: 51
  • 7.jpg
    7.jpg
    156.6 KB · Views: 63
Last edited:

alcro1998

Aluminum
Joined
Nov 10, 2020
Location
Central Ohio
I’m open to offers. I don't think it’s unreasonable. The machine is in better shape than 95% of the machines I’ve seen in person at HGR. I feel like condition matters a lot more than age. Biggest downside IMO to the older machines is the spindle speeds are slower than newer ones.
 








 
Top