What's new
What's new

Mori Seiki SL-0 Alarm code

metalle

Plastic
Joined
Sep 3, 2012
Location
California
Hi to all, I am new to the forum and would like to ask for some expert advice,
I have a Mori Seiki SL-0 in great mechanical shape with a Yasnac LX-1 controller
On Powering it up I am getting a couple of alarms 172,173,174,400 a 320 and a 342
looking at the manual the 342 has a flow chart that points at the servo CPU board.
What now? Any idea on what my next step in troubleshooting should be?
tks
g
 

metaltech

Hot Rolled
Joined
Feb 7, 2007
Location
midcoast U.S.A.
getting a couple of alarms 172,173,174,400 a 320 and a 342


Hmmm, a couple? Looks like 6 to me. Can you tell us what the manual says the other alarms are?

Without knowing what they all are, I'd take a WAG that this is a system corruption. Have you checked your 3volt lithium backup battery? It's about a "C" size, bright yellow. Uh, don't disconnect with the control off, or you WILL lose everything, if you haven't already.
 

metalle

Plastic
Joined
Sep 3, 2012
Location
California
IMG_7516.jpg
Here is a screen shot and what it says.
I will check the battery voltage tomorrow...but I think its lost its parameters and settings already.
Still will check voltage
g
 








 
Top