Adamsmetalshop
Plastic
- Joined
- Jun 4, 2020
Ok so I just replaced all ice cube relays with new ones in the main power cabinet. No change. There are several small capacitors or spark killers as they are called in my manual. I'm not getting 100v to my coils from the transformer but the transformer is testing at 100v when I put leads on the output side of the transformer. The 100v terminal have wires that say S11 R7 or whatever they go to a series of capacitors that read .1uf 500vdc 100ohm so is it a resistor or capacitor? Or both? I'm 2 months into this now and I'm not even sure if my spindle drive works. There's a panel on top of the spindle drive that has blue wires that seem to go to relays maybe or the right hand door panel?
