Multiple items for sale

[leeko]

Updates:

The Versamill appears to be Morse taper #3, as does the high speed head. Both have captive drawbars, so the centers I took to check cant seat all the way, but the dimensions appear correct.

The Heinrich drill jig is sold

The L1 faceplate is sold

The Bridgeport rotary table is sold

The Doall cylindrical grinding attachment is sold pending payment

Thanks

Sent from my SM-N960U using Tapatalk

 

[leeko]

The larger of the L00 plates (drive plate) is 6" diameter. The smaller is 3-1/4" diameter.

Sent from my SM-N960U using Tapatalk

 

[leeko]

Updated list, and some new items for sale:

Still Available, some price adjustments:
- Versamill (MT#3 size), high speed milling head, additional casting, original manual and motor $600
- Bridgeport brand right angle head, overarm support, 2 R8 arbors with spacers and nuts. $400
- Hardinge lathe turret. Seems in good shape, just dirty. $175
- Cincinatti #2 tool and cutter grinder heavy duty grinding workheads x4. Good shape. $150 each
- Kaiser 50 taper tool presetter. Needs cleaned. $125
- MT#3 Workhead for Taiwanese Tool and cutter grinder. $125
- Dorian CA 880 series grooving threading toolholder. $75
- L00 drive plate 6" - $50
- L00 spindle nose protector 3-1/4" - $50
- Guard for Powermatic 90 wood lathe. $50
- Cincinatti #2 radius grinding fixture - one part missing. $75
- Cincinatti form relieving fixture - one part missing. $75
- 50 taper horizontal milling arbors, various sizes - $50 bare, $75 with nut
- Unmarked CA toolholder. $20
- Dickson toolholder. $20
- HSK63F calibration tool - new in box - $40
- Shaft vise. Small chip out of one jaw. $35
- Steady rest (16" swing) for Flathers lathe - $60
- Steady rest (12" swing) maybe for grinder with dovetail ways - $60
- Steady rest (9" swing) for weird little lathe with round bedways - $50

New items for sale:
- Robins ME-99 magnetic eraser (Demagnetizer) - $40 each, 2 available
- Atlas X-Y table - needs cleanup, but otherwise good shape - $200
- L-W Chuck Co, 4" swivel machine vise w/handle - got friendly with PO's slotting cutter - $40
- Heald UF-351 18" Faceplate, camlock? back - $150
- Bridgeport brand 40 taper 1" face mill holder, integral pull stud - unused - $30
- Schauer 5C speed lathe on cast iron pedestal - needs a little work- $150

Some photos of these items on the google drive link. Feel free to ask for more photos or info.

SOLD:
- Doall cylindrical grinding attachment w/sine plate. Absent tailstock. I intended to make a simple tailstock, then I found a T&CG. SOLD
- Bridgeport 12" rotary table. A few minor scars on table. Nice and tight, 0.007" backlash. SOLD
- Heinrich Cross drilling jig. SOLD
- L1 faceplate. SOLD

 

[jkopel]

Would you be willing to ship one of the demagnetizers?
Thanks,
Josh

 

[leeko]

Would you be willing to ship one of the demagnetizers?
Thanks,
Josh

Yes, no problem. It should fit in a medium FRB.

Lee

Sent from my SM-N960U using Tapatalk

 

[steelsponge]

Leeko I PM'd you on the dividing head. I live in Mn. let me know if you still have it. I left my contact info in the PM message thank you Clyde

 

[MichaelP]

May I have the second demagnetizer shipped to me?

 

[leeko]

Leeko I PM'd you on the dividing head. I live in Mn. let me know if you still have it. I left my contact info in the PM message thank you Clyde

Hi Clyde,

Zahnrad was first in line for the dividing head, but I haven't heard from him in a couple days. I'll reach out to him by PM, and will let you know what he decides.

It does look to be a universal, best I can tell.

Thanks

Lee

Sent from my SM-N960U using Tapatalk

 

[leeko]

May I have the second demagnetizer shipped to me?

No problem. The total will be $55 with shipping. I'll pm my PayPal details, thanks

Sent from my SM-N960U using Tapatalk

 

[leeko]

Leeko I PM'd you on the dividing head. I live in Mn. let me know if you still have it. I left my contact info in the PM message thank you Clyde

Clyde, Zahnrad has passed on the dividing head, still available. Will pm you

Zahnrad, thanks for the reply. I tried to reply to your pm to acknowledge, but your inbox is full.

Best regards,

Lee

Sent from my SM-N960U using Tapatalk

 

[gbent]

Do you have pictures of the Cincinnati form relieving head, and knowledge of what is missing?

 

[leeko]

Hi

Not much, but here is the thread I asked about it - see post #23, and a little later on there's a link to another thread with more info on it.

Best regards,

Lee

Does anyone recognize this vertical head attachment?

Sent from my SM-N960U using Tapatalk

 

[steelsponge]

Clyde, Zahnrad has passed on the dividing head, still available. Will pm you

Zahnrad, thanks for the reply. I tried to reply to your pm to acknowledge, but your inbox is full.

Best regards,

Lee

Sent from my SM-N960U using Tapatalk

Thank you Leeko, I will be waiting to hear from you i am definitely interested in the head. Clyde

 

[leeko]

Hi Clyde

I emailed you some pictures just now - thought I'd hit send earlier, but it apparently didn't go through. Sorry about that!

Lee

Sent from my SM-N960U using Tapatalk

 

[leeko]

Updates:

Still Available, some more price reductions:

- Versamill (MT#3 size), original manual and motor. Attachments no longer available $500

- Bridgeport brand right angle head, overarm support, 2 R8 arbors with spacers and nuts. $350

- Cincinatti #2 tool and cutter grinder heavy duty grinding workheads x4. Good shape. $125 each

- Kaiser 50 taper tool presetter. Needs cleaned. $100

- MT#3 Workhead for Taiwanese Tool and cutter grinder. $100

- Dorian CA 880 series grooving threading toolholder. $60

- L00 drive plate 6" - $45

- L00 spindle nose protector 3-1/4" - $45

- Guard for Powermatic 90 wood lathe. $25

- Cincinatti #2 radius grinding fixture - one part missing. $60

- Cincinatti form relieving fixture - one part missing. $60

- 50 taper horizontal milling arbors, various sizes - $45 bare, $65 with nut

- Unmarked CA toolholder. $20

- Dickson toolholder. $20

- HSK63F calibration tool - new in box - $30

- Shaft vise. Small chip out of one jaw. $30

- Steady rest (16" swing) for Flathers lathe - $50

- Steady rest (12" swing) maybe for grinder with dovetail ways - $50

- Steady rest (9" swing) for weird little lathe with round bedways - $40

- Atlas X-Y table - needs cleanup, but otherwise good shape - $175

- L-W Chuck Co, 4" swivel machine vise w/handle - got friendly with PO's slotting cutter - $35

- Heald UF-351 18" Faceplate, camlock? back - $125

- Bridgeport brand 40 taper 1" face mill holder, integral pull stud - unused - $25

- Schauer 5C speed lathe on cast iron pedestal - needs a little work- $150

Some photos of these items on the google drive link. Feel free to ask for more photos or info.

SOLD:

- Robins ME-99 magnetic eraser (Demagnetizer) - $40 each, SOLD

- Doall cylindrical grinding attachment w/sine plate. Absent tailstock. I intended to make a simple tailstock, then I found a T&CG. SOLD

- Bridgeport 12" rotary table. A few minor scars on table. Nice and tight, 0.007" backlash. SOLD

- Heinrich Cross drilling jig. SOLD

- L1 faceplate. SOLD

Sent from my SM-N960U using Tapatalk

 

[lucky7]

What size is the Dickson lathe tool holder? Center of v to other center please.

Regards,
Lucky 7

 

[ronf]

what length is your 50 taper milling arbor in 1 1/2 diameter?

 

[Mr_CNC_guy]

I sure am interested in the Cincinatti #2 radius grinding fixture but I cannot
come and pick it up. Could you take it to a Staples or any other "pack it for you"
type shop?

Thanks,
Pete.

 

[cyanidekid]

I’m interested in the BP 90deg head, arbors and support, and the two CA toolholders you have. Still available?

 

[leeko]

What size is the Dickson lathe tool holder? Center of v to other center please.

Regards,
Lucky 7

Hi Lucky7
The centre to center looks to be 3.2", or around 80mm

Lee

Sent from my SM-N960U using Tapatalk