Multiple items for sale

[leeko]

what length is your 50 taper milling arbor in 1 1/2 diameter?

Hi,

Sorry, but I only have 1" and 1.25" arbors left. All are in the 18-25" range

Lee

Sent from my SM-N960U using Tapatalk

 

[leeko]

I sure am interested in the Cincinatti #2 radius grinding fixture but I cannot
come and pick it up. Could you take it to a Staples or any other "pack it for you"
type shop?

Thanks,
Pete.

I might be able to get it to the UPS close to me, but it will likely be a while - I injured my elbow, so any heavy lifting is out for a while.

I also would take no responsibility for the packing job, or any damage in transit...

Sent from my SM-N960U using Tapatalk

 

[leeko]

I’m interested in the BP 90deg head, arbors and support, and the two CA toolholders you have. Still available?

Yes, all still available

Sent from my SM-N960U using Tapatalk

 

[cyanidekid]

Excellent! Thank you for the quick response, can you make a deal on the three items? Actually I have the 90 deg head, need the arbors,Outboard support, and the two CA tool holders, with shipping to Brooklyn, NY 11205?

 

[leeko]

Cyanidekid, will send you a pm

Sent from my SM-N960U using Tapatalk

 

[Mr_CNC_guy]

I might be able to get it to the UPS close to me, but it will likely be a while - I injured my elbow, so any heavy lifting is out for a while.

I also would take no responsibility for the packing job, or any damage in transit...

Sent from my SM-N960U using Tapatalk

I can live with that! That is fair.

Thanks,
Pete.

 

[leeko]

Updates, what's left and some new items.

New Items:
Lathe spindle taper adapters:
Logan Engineering Co. MT3 to 3C? or 3AT - $50
Unmarked MT3 to 3C/3AT - $50

Lathe spindle nose protectors:
L00 - $45
The following are caliper measured, so they may not be exact. There's the possibility they may be metric, but all checked out with an SAE thread gage so I'm going with the inch measurements here:
2-3/8" 13tpi - $50
2-1/4" 6tpi, minor diameter 2.188", lots of rust - $30
2-1/4”? 6tpi, minor diameter 2.050" - $50
2-1/8"? 8tpi, minor diameter 2.100" - $50
? 12tpi, minor diameter 2.135" - $50
1-3/4? 8tpi, minor diameter 1.630" - $50

What's left:

- Versamill (MT#3 size), original manual and motor. $450

- Bridgeport brand right angle head alone. $200

- Cincinatti #2 T&CG workheads x4. $100 each

- Kaiser 50 taper tool presetter. Needs cleaned. $75

- MT#3 Workhead for Taiwanese Tool and cutter grinder. $100

- L00 drive plate 6" - $45

- L00 spindle nose protector 3-1/4" - $45

- Guard for Powermatic 90 wood lathe. $25

- Cincinatti #2 radius grinding fixture $60

- Cincinatti form relieving fixture $60

- 50 taper horizontal milling arbors, various sizes - $45 bare, $65 with nut

- Dickson toolholder. $20

- HSK63F calibration tool - new in box - $30

- Shaft vise. Small chip out of one jaw. $30

- Steady rest (16" swing) for Flathers lathe - $50

- Steady rest (12" swing) for Barnes No.5 lathe - $50

- Steady rest (9" swing) for weird little lathe with round bedways - $40

- Atlas X-Y table - needs cleanup, but otherwise good shape - $175

- L-W Chuck Co, 4" swivel machine vise w/handle - got friendly with PO's slotting cutter - $35

- Heald UF-351 18" Faceplate, camlock? back - $125

- Bridgeport brand 40 taper 1" face mill holder, integral pull stud - unused - $25

- Schauer 5C speed lathe on cast iron pedestal - needs a little work- $150



Sent from my SM-N960U using Tapatalk

 

[leeko]

Some pictures:

 

[Mr_CNC_guy]

Still interested in the Cincinatti #2 radius grinding fixture if
you could drop it off at a UPS shipping center for packaging.

Thanks,
Pete.

 

[leeko]

Still interested in the Cincinatti #2 radius grinding fixture if
you could drop it off at a UPS shipping center for packaging.

Thanks,
Pete.

Pete, I pm'ed you yesterday. UPS said it will need to go freight, with prices starting at $300

Sent from my SM-N960U using Tapatalk

 

[Mr_CNC_guy]

Yes you did, sorry that I missed it.
$300 is a bit too much for me. Thanks
for your efforts.

Pete.