Hi all I’m hoping some of you can help me with a few questions about a lathe I acquired. This is my first post but I have been a member for a while absorbing info and using it for work ( I’m a shop teacher in upstate ny).I finally started trying to get my home shed in order and I acquired a Nardini MSC 1440e. It needs a few major things and I know parts are nonexistent at this point but before I even go down that road I’m finding it impossible to find any information on the MSC model. I found a manual for an ms1440e and it came with a manual that was from nardini but was not from the machine. So any and all help on model history would be very helpful. I really don’t think their is a ton different on the msc from the manuals I have but the 2 things that have me scratching my head are the lead screw (which is a very fine pitch compared to anything I’ve ever seen) and the motor being from GE( at least that’s what it says on the sticker on the apron) I did hear some ware that their was a factory in the usa that made them for a bit but I couldn’t verify that. Anyway thanks in advance for any and all in site on this for me