What's new
What's new

Need manual for Boyer Schultz 618-H Surface Grinder

PeterH48

Aluminum
Joined
May 3, 2006
Location
New England
Looking for a manual for my Boyer Schultz surface grinder. Mine is a 618-H, not to be confused with an H618 which is a different machine. There is a Boyer&Shultz manual here on the site, but the link is dead and does not work. Mine has a fully hydraulic table with the tank and pump built into the machine base cabinet. It also is v-belt driven off a pulley on the back of the spindle. The motor is mounted in the lower rear machine cabinet. Even a manual that is not the same as mine, but similar in design would be a big help. Always searching on ebay, but so far nothing close has come up.
 








 
Top