Microshaped
Aluminum
- Joined
- Jul 19, 2014
- Location
- USA, IL
Good Evening all
Need some assistance on Meldas-M2 Control on my Mitsubishi MPA-V55 I just got a sequence error alarm #1 anyone no how to resolve this alarm, I was in the middle of a tool change when my shop lost power started machine back up and the alarm was there I can hold down the machine ready button and machine will function as normal but as soon as you let go of the button it goes back into emergency state. used my indicator mag base to hold down the button while I manual Cycle the ATC M Codes in mdi to get the Arm and Pods back into normal position figuring that was the issue but the alarm is still there.
Thank You
Matt
Need some assistance on Meldas-M2 Control on my Mitsubishi MPA-V55 I just got a sequence error alarm #1 anyone no how to resolve this alarm, I was in the middle of a tool change when my shop lost power started machine back up and the alarm was there I can hold down the machine ready button and machine will function as normal but as soon as you let go of the button it goes back into emergency state. used my indicator mag base to hold down the button while I manual Cycle the ATC M Codes in mdi to get the Arm and Pods back into normal position figuring that was the issue but the alarm is still there.
Thank You
Matt