OKK MELDIS 635 TSC no codes will turn the coolant on, only the option button

[GUY IN THE OFFICE]

Hi, first post.
I am the guy in the office(from the floor) trying to find answers for our machinist.
We have twin okk's with Mitsubishi meldas 600's controls.
The through spindle coolant is thought to be an add on to the machine. We can hit the option button on the control and turn the coolant on or of anytime it's pressed.
The problem is we can't get any of the m-codes to turn it on within the program.
I read through some of the other threads and none of the options worked out.
I looked through the parameters briefly but nothing hit in the face to fix it.
Any insight on this would be highly appreciated!

Next problem I will be tackling the ethernet parameters so we can upload programs form a network place...we got the drops in and I.T. is on its way to connect to the domain.

 

[Vancbiker]

If it was an add on, then you will have to figure out how the TSC unit was interfaced. Most M code assignment is done by the machine builder. They often provide a few spares that can be utilized to actuate add on accessories.

 

[GUY IN THE OFFICE]

Someone else came up with the answer. It looks like the parameters set to turn on with M58 and off M59.
Now if I can get the ethernet talking.