PROBE OPEN ALARM

[shuka]

I NEED SOME HELP PLEASE. I INSTALLED A RENISHAW PROBE ON MY MACHINE YESTERDAY( HAAS 2003VF4SS) AND HAVE ALL THE MACRO TEMPLATES BUT THE TOOLSETTER TEMPLATE V2.8 .I KEEP GETTING A (PROBE OPEN ) ALARM ON THE FIRST CALIBRATION. AND CANT MOVE FORWARD. BTW MY PROBE IS THE OMP40-2 OMI-2T OTS.the receiver is in stand by mode and then I can use the macros or the m code to turn probe 1 or 2 on or off. During the calibration Marco it turns the OTS on but then throws the alarm.IS IS THERE SOMETHING ELSE I CAN DO
THIS IS THE CODE. I DO GET A SKIP BEEP ON EITHER PROBE.

G80 G90 G0
M52
G65 P9851 K4.125
#592=1.
G65 P9852 S.460 K.5
#592=-2.
G65 P9852 S.460 K.5
G103
M30