Prototypeshop

[www.technika.nu]

DRO

I am satisfied with the DRO.
I have not measuered it up, and controlled if it really is right though.


Camera.
The handgun pictures is a Hasselblad camera, I didnt take those pictures.

But all the pictures of scopemounts, Night vision, Grenade launcher sight etc is me taking the photo. The camera used is a Nikon D200, and the lens is a Micro-Nikkor 60mm.
I don't think the camera has so much to do with the result though, it's the lens and most of all the light.
I have a homemade setup with indiscandent light that works pretty ok for me, without that the pictures would look very poor.

 

[Areomyst]

Awesome!

Thank you for sharing. I enjoy seeing photos of other people's shops, and work. It's inspiration for those of us trying to get small shops off the ground.

All the best,

~Josh

 

[www.technika.nu]

Pretty long since my last post.
Here is anyway latest machine that I got in yesterday.
An Aciera VA22 drillpress.

Håkan

 

[www.technika.nu]

Little helper in Aciera

Boltfluting in Thörn toolgrinding machine.

Too small ejectionport in Tikka T3 is adjusted

Stock adapter for HK G3 are beeing made.

New Forend are beeing made

New prototype upper reciver

Long 92F barrel made out of a 1 3/4" blank


Regards Håkan

 

[s33]

I just have to say the 686 brought back some good memory's I had mine stolen out of my truck 2 years ago

 

[CBlair]

Glad to see you are still doing well and thanks for sharing, the bolt looks nice.

Charles

 

[www.technika.nu]

I am awfully fond of Lugers and have competed loads with them.i am going to make a new toggle inkluding a windage adjustable sight.

Here is the planned looks!



Here is the Calmax material packed in for hardening


960celcius in furnace



After first cut in EDM

 

[www.technika.nu]

Installed a new machine a Schaublin 12 and I like it a lot.

 

[www.technika.nu]

www.technika.nu - Practical Machinist(56535) on Vimeo

Some simple manual machining to make a cattail, just for thefun Of it

 

[www.technika.nu]

www.technika.nu - Practical Machinist(56535) on Vimeo

Here is just a simple way of cutting torx head in a newly made screw