Rigging a KO Lee 718HG Surface Grinder

[AndyF]

I'm looking at a KO Lee 718HG surface grinder at the end of the week and will be bringing it back to the shop if it looks OK. It is a 6x18 grinder with hydraulic feeds and the seller will be loading on to a trailer with a Skidsteer. Is there anything I need to be mindful of when it is being loaded?

 

[michiganbuck]

Good to lock the table from long travel. Crank the wheel down to set set on a woodblock to tale loose the down feed nut.
Wrap it in something to keep dust out, and lose parts from flying. If a balls way long travel many say to take the balls out..when I do that I like to keep them in about that same place to out from center and fronts and back balls (this may be over kill but I do that).