What's new
What's new

Side by Side comparison of the 10EE Steady Rest

Jdub63

Aluminum
Joined
Jan 10, 2020
Thanks to rke[pler for sending me a steady rest for my Square Dial 10EE. Since I had both on the workbench, I thought I would take some pictures and post them for the next guy looking for one. For the most part the dimensions are similar on the top half, however the bottom half of the square dial version is ~ 1/2 taller in the base. The best way I found to measure was from the dividing line to the flat side of the base. The shorter version (gray one) is ~ 6.25 inches whereas the tall version (tan one) is ~ 6.75 inches. Hope these help.


IMG_3741.JPEGIMG_3743.JPEGIMG_3742.JPEG
 








 
Back
Top