Mark Winsor
Aluminum
- Joined
- Feb 4, 2013
- Location
- Hartford, CT, USA
I'm looking for more suppliers that make prototype parts out of 3D printed metal. Aluminum is my biggest interest.
I would be looking to do small batches of 3 or 4 parts at a time, roughly 4"x3"x1", tolerances must be +/- .020 or so. Thinnest wall is .040"
Thanks for any leads!
Mark
I would be looking to do small batches of 3 or 4 parts at a time, roughly 4"x3"x1", tolerances must be +/- .020 or so. Thinnest wall is .040"
Thanks for any leads!
Mark