joseph haesche
Plastic
- Joined
- Jun 2, 2022
Hello!
I was replacing the bronze motor bushings for the Standard Electric original motor on my newly acquired South Bend 9A lathe. The gentleman had pictured the drum switch and it ran correctly. I had to dis assemble the motor to replace the bushings and thought I tagged the wires correctly but when I started it it ran backwards in the forwards position and forwards in reverse. I would be grateful for the correct wiring sequence. Presently from the switch to the motor
red is 5
black is 1
green is t4 and
white is 8
Joe
I was replacing the bronze motor bushings for the Standard Electric original motor on my newly acquired South Bend 9A lathe. The gentleman had pictured the drum switch and it ran correctly. I had to dis assemble the motor to replace the bushings and thought I tagged the wires correctly but when I started it it ran backwards in the forwards position and forwards in reverse. I would be grateful for the correct wiring sequence. Presently from the switch to the motor
red is 5
black is 1
green is t4 and
white is 8
Joe