What's new
What's new

South Bend CL 187RB

Joe Miranda

Titanium
Joined
Oct 19, 2004
Location
Elyria Ohio
South Bend Lathe for sale. $2700 obo. There is some damage on the rear way near the chuck. Looks like someone started the spindle with the chuck key in the chuck - oops! The threading dial was removed and a Trav-A-Dial was installed in its place. The threading dial comes with. I think it is currently set up for 440v but I will check and post it when I get a minute.
 

Attachments

  • pic 2.jpg
    pic 2.jpg
    4.1 MB · Views: 103
  • pic 5.jpg
    pic 5.jpg
    4 MB · Views: 90
  • pic 3.jpg
    pic 3.jpg
    3.1 MB · Views: 83
  • pic 4.jpg
    pic 4.jpg
    1.4 MB · Views: 80
  • pic1.jpg
    pic1.jpg
    1.6 MB · Views: 80
  • pic6.jpg
    pic6.jpg
    4.1 MB · Views: 89
Currently wired for 440 but it is a dual voltage motor. Jim - I will check on the dials this evening.
 

Attachments

  • motor tag pic.jpg
    motor tag pic.jpg
    2.5 MB · Views: 9
Not a customer for the machine Joe, but I've never seen dials like that on a SB and they look factory - and if so they'd likely be a major selling point for some buyers.
 
Thanks for the alert Jim. Yes, they are factory dials and they are inch//metric.
 

Attachments

  • inch metric dials.jpg
    inch metric dials.jpg
    1.4 MB · Views: 16
  • inch metric dials 2.jpg
    inch metric dials 2.jpg
    1.5 MB · Views: 16








 
Back
Top