What's new
What's new

South Bend Hand lever draw in collet removal

mofosheee

Plastic
Joined
Dec 21, 2012
Location
Somewhere in Colorado
Hello Practical Machinist forum

Please refer to the two attachments. I've acquried a SB 9A with a hand lever draw-in collet attachment.
I'd like to remove this attachment and am at a loss as to how. I realize the second .jpg is for a 10 or a 16L.

Any suggestions? Thank you
 

Attachments

  • South bend 9 (2).jpg
    South bend 9 (2).jpg
    211.5 KB · Views: 17
  • South Bend 9 (3).jpeg
    South Bend 9 (3).jpeg
    388.9 KB · Views: 14

SteveBerry

Plastic
Joined
Mar 18, 2007
Location
MO. USA
If you don’t have a collet in the spindle you can pull the attachment straight off the spindle. Their is a pin in the end of the spindle on the gear end that locks the closer to the spindle.
 








 
Top