Square Dial 10 EE (1950) gasket files on Thingaverse to 3d print or vinyl cutter.

[mooserov]

just search 10EE.
I've started modeling the gaskets as I'm changing them and I'm going to try 3d printing some with TPU flexible filament. I included the step files too for cutting them out on a cricut or similar vinyl cutter out of paper or cork gasket material. As I get more I will add more.
If anyone wants to contribute, IM me a flatbed scan of a gasket with a machinist scale next to it and I will model it and upload. Learning Autodesk and Solidworks.
Mooserov

 

[Hobby Racer]

I found that laser cutting them out of FEL-PRO 3045 Gasket Materials works very well. I did most of the gaskets for my 1942 10EE.

 

[Jdub63]

Mooserov, Thanks for putting those out there. I'm interested in doing some for the ELSR components, I'll send you an IM...

Thanks again.

jdub

 

[TBJK]

I think if you have a laser cutter, you can cut the non-asbestos gasket material, Garlock or what ever you call it. Its on my list of things to try.

 

[mooserov]

3 more files for the ELSR up thanks to jdub63.

 

[mooserov]

https://www.thingiverse.com/mooserov/designs

 

[medic29]

just search 10EE.
I've started modeling the gaskets as I'm changing them and I'm going to try 3d printing some with TPU flexible filament. I included the step files too for cutting them out on a cricut or similar vinyl cutter out of paper or cork gasket material. As I get more I will add more.
If anyone wants to contribute, IM me a flatbed scan of a gasket with a machinist scale next to it and I will model it and upload. Learning Autodesk and Solidworks.
Mooserov

This is a awesome idea. Thanks so much for doing this. I too have a laser cutter and have used it to make the felts for the ways.

 

[Jdub63]

Medic, Do you have the files for the way wipers? Maybe we can consolidate them in one location

 

[medic29]

Medic, Do you have the files for the way wipers? Maybe we can consolidate them in one location

Yeah, I'll look for them and post them.