tear down 10EE backgear

[grounding]

I will cut them 5 deep on the 'jet. Four sets FREE to members here, priority to anyone helping me in this thread.

May be a while, paying jobs get priority on my son's jet.

Karl

I'd love to buy some gaskets, but my machine is from 41' and they probably won't fit.

 

[Hobby Racer]

I'd love to buy some gaskets, but my machine is from 41' and they probably won't fit.

The gaskets are sized from a 42, they should definitely fit.

 

[Karl_T]

You get the first spare set. I am thinking get a 30x30 of this gasket:
Best one?

 

[amaranth]

I'm doing a refurb on my '42 10ee. The backgear is stuck so that's going to get opened up. I'd be interested in a set if available.

 

[DaveKamp]

My '42's gearbox sits waiting for attention. I won't let you give me a set for free, but I'll pay you for one! Send me an address to which I can send adequate compensation and shipping...

 

[Karl_T]

I just ordered enough gasket material to do ten sets. For sure, I'd take a few $ donation. Not about to charge the shop rate -we've never cut gasket.

I am drawing up the 1" plate and 1/2" plate to remount the back gear to a face mount motor. We will cut the gasket the same day these parts are 'jetted.

I will post here when they are ready.

 

[TheOldCar]

Donation $$$ is anxiously awaiting!