What's new
What's new

Titan 760D ATC Spindle Position Parameter

J_Christiano

Plastic
Joined
Jun 6, 2023
I recently had to change our spindle in one of our 760D mills and need to adjust the Z-Axis position in which the spindle goes to in order to do a tool-change.

Unfortunately, the machine came with manuals for the 1000D and OMF control where ours is an OM control. The manuals we were given says parameter 510 for changing spindle height and am wanting to check if that parameter number matches up to an OM control.

If not, what is the correct parameter? Sorry if this seems like a very obvious answer. Just making sure that I don't change a parameter and it doesn't correspond to what I'm after.

Thanks,
 








 
Back
Top