What's new
What's new

Trade: My Aloris BXA holders for your Aloris AXA holders

jwearing

Hot Rolled
Joined
Aug 26, 2017
I just bought a lathe with a mixed lot of tooling. It has an AXA tool post but most of the holders are BXAs. I'm going to keep the AXA tool post and if possible trade these for AXAs. Plus or minus cash is negotiable depending on what you have.

2x Aloris BXA-7
1x Aloris BXA-104
1x Aloris BXA-2
1x Yuasa 740-202

IMG_0505.jpg
IMG_0506.jpg

They are in ok shape, a few rust patches and a couple missing set screws. One missing adjusting nut. See the photos.
 
I just bought a lathe with a mixed lot of tooling. It has an AXA tool post but most of the holders are BXAs. I'm going to keep the AXA tool post and if possible trade these for AXAs. Plus or minus cash is negotiable depending on what you have.

2x Aloris BXA-7
1x Aloris BXA-104
1x Aloris BXA-2
1x Yuasa 740-202

View attachment 207156
View attachment 207157

They are in ok shape, a few rust patches and a couple missing set screws. One missing adjusting nut. See the photos.

PM sent on tool holders.
 
Alan, it was great to meet you, thanks again.

Update on the listing: All are gone except for one BXA-7, the one on the lower right of the photos. I will still trade or will sell for $50 shipped obo. BTW the adjusting nut was swapped and is now missing.
 








 
Back
Top