Understanding Mazatrol T2 conversational

[benganboll]

If a machine does not have the eia/iso option, can or cant you do a manual process with G codes in mazatrol then?

 

[GP Tech]

But you dont have the DNC option in your machine so I guess that wont work.

Check this movie I made yesterday when I tranfer 2 programs named 1 & 2 to my QT30ATC that dont have the DNC option.
http://hagstromsystems.se/_Files/MazView.MOV

On first blush it looked like they worked without needing EIA/DNC, but that is clearly not the case. Philabuster posted back in 2010 I think saying you needed the FX17 board as well as the EIA EPROM's on the FX784-9 board, not such an easy solution.

 

[Gobo]

If a machine does not have the eia/iso option, can or cant you do a manual process with G codes in mazatrol then?

Using a Mazatrol manual process will allow you to use some G codes.

 

[trnkav]

Hi .
How it turned out with T2. I have the same problem . I need to send data to and from the lathe.