SageGlad
Aluminum
- Joined
- Apr 16, 2022
Hey people! About a week ago I had a problem with the parameters (was factory reset) on my haas VF7, the machine has a bunch of alarms with spindle overload. I fixed it restoring my parameters from the usb stick that comes with the machine. Thanks god, because Haas wanted $3k for this 15 minutes job…
So today, a week after I turned on the machine and it won’t boot showing me unrecoverable error. I found some info about it, but nothing particular. Software bug cause the machine to stuck while booting.
I was powering it down, waiting for a while and powering it up again, no changes.
So the only way now is software update, as I’ve found on some of haas repair and troubleshooting manuals. But they don’t allow the owner to download the soft got their own machine???? Wow! It’s nonsense, I have never seen such a crazy disrespect to the customers.
I was wondering if someone here have mill software by any chance. Version 18.10C
Any comments are very welcome guys.
Please help to find out.
So today, a week after I turned on the machine and it won’t boot showing me unrecoverable error. I found some info about it, but nothing particular. Software bug cause the machine to stuck while booting.
I was powering it down, waiting for a while and powering it up again, no changes.
So the only way now is software update, as I’ve found on some of haas repair and troubleshooting manuals. But they don’t allow the owner to download the soft got their own machine???? Wow! It’s nonsense, I have never seen such a crazy disrespect to the customers.
I was wondering if someone here have mill software by any chance. Version 18.10C
Any comments are very welcome guys.
Please help to find out.