What's new
What's new

Vogel tube notcher, 1-1/4" sch 40

SShep71

Cast Iron
Joined
Sep 17, 2014
Location
San Diego, Ca
I have a tube notcher for a hydraulic press, Scotchman, Piranha, etc. It is in really good condition from what I can tell. There is some paint wear on the base, there is some marking left from some surface rust and shop grit, but overall it looks good. The shearing die is sharp and shows minimal sign of use, the bottom die is still sharp (in terms of these notchers). I took the whole thing apart this past week and cleaned everything, cleaned the light rust off, oiled everything, and put it back together. It presses and returns fine, I didn't try to notch a pipe as I don't have any on the shelf that size and schedule. Worked great for making fence and gates, super fast, much faster than milling or cutting. It is marked 1112 1-1/4" sch 40. $750.00 plus $50.00 shipping and insurance. $800.00 shipped
 

Attachments

  • KIMG0594.JPG
    KIMG0594.JPG
    412 KB · Views: 3
  • KIMG0595.JPG
    KIMG0595.JPG
    395.2 KB · Views: 3
  • KIMG0596.JPG
    KIMG0596.JPG
    426.3 KB · Views: 3
  • KIMG0597.JPG
    KIMG0597.JPG
    394 KB · Views: 3








 
Top