Want to Buy: South Bend 9A Countershaft & Pulley

[DDinsk]

I am looking to buy a South Bend 9A Countershaft & Pulley.

Part # AS1960N3.

Please refer to attached diagram for reference.

Thanks,

DDinsk

 

[k3vyl]

I am looking to buy a South Bend 9A Countershaft & Pulley.

Part # AS1960N3.

Please refer to attached diagram for reference.

Thanks,

DDinsk

Checked my B model shaft and it is .874 diameter. A material known as shafting. If you end up making yourself one this will be good info.


d up making

 

[DDinsk]

Checked my B model shaft and it is .874 diameter. A material known as shafting. If you end up making yourself one this will be good info.


d up making

Thanks for the info k3vyl. Does anyone know if a South Bend Heavy 10 underneath motor drive pulley (excluding the shaft) will be a direct swap for a 9A horizontal drive unit stepped pulley?

 

[k3vyl]

Thanks for the info k3vyl. Does anyone know if a South Bend Heavy 10 underneath motor drive pulley (excluding the shaft) will be a direct swap for a 9A horizontal drive unit stepped pulley?View attachment 368131View attachment 368132

 

[k3vyl]

The pulleys on my B model are 9 1/2 and 9 15/ 16 diameter. This is a V belt driving a flat pulley, and works fine. It uses a V pulley on the motor. A B belt is used. A so called V/ flat drive.