WEAR Issue

[VCI1759]

Hello All,
I'm having issues with my VF2-SS control not letting my cutters adjust for diameter WEAR inputs on the control.

I have a cutout for red dot sight on a Glock slide that i programmed in CAM Works and it worked just fine on my MiniMill2, meaning my contour pass allowed for Diameter WEAR inputs on the control.
I have a rough and finish toolpath stadegy I'm using and cutter compensation is checked in CAMworks and it did work on my MiniMill.

When I run the program on my VF2-SS nothing adjust when I input -.0125 on the control. This happened with another program as well.

Anyone have this issue? Know why? Know how to fix it?

Thank you in advance.

VP

 

[mhajicek]

Post your code and maybe someone can help you.

 

[Booze Daily]

No D, wrong D?

 

[VCI1759]

This is the code for the rough and finish pass. The .250 cutter on the finish pass is what I'm trying to apply wear to through the control:

G00 G17 G40 G49 G90 G94
G91 G28 Z0

M01
T11 M06 (1/2 EM CRB 3FL 1 LOC)
( Rough Mill1 )
S1910 M03
G90 G54 G17 G00 X1.0781 Y.6143
M08
G43 H11 Z1.
Z.1
G01 Z-.05 F3.1515
X1.0952 Y.3951 F12.606
G02 X1.0965 Y.36 I-.4511 J-.0351
G01 Y.316
G02 X1.7525 Y-.5037 I.2875 J-.4423
X1.0965 Y-1.3235 I-.3684 J-.3775
G01 Y-1.3671
G02 X1.0875 Y-1.4573 I-.4525 J0
G01 X1.0542 Y-1.6208
Z-.0875 F3.1515
X1.0875 Y-1.4573 F12.606
G03 X1.0965 Y-1.3671 I-.4434 J.0902
G01 Y-1.3235
G03 X1.7525 Y-.5037 I.2875 J.4423
X1.0965 Y.316 I-.3684 J.3775
G01 Y.36
G03 X1.0952 Y.3951 I-.4525 J0
G01 X1.0781 Y.6143
Z-.125 F3.1515
X1.0952 Y.3951 F12.606
G02 X1.0965 Y.36 I-.4511 J-.0351
G01 Y.316
G02 X1.7525 Y-.5037 I.2875 J-.4423
X1.0965 Y-1.3235 I-.3684 J-.3775
G01 Y-1.3671
G02 X1.0875 Y-1.4573 I-.4525 J0
G01 X1.0542 Y-1.6208
G00 Z.1
X.8577 Y-1.6211
G01 Z-.05 F3.1515
X.8988 Y-1.4189 F12.606
G03 X.904 Y-1.3671 I-.2548 J.0518
G01 Y.36
G03 X.9033 Y.3802 I-.26 J0
G01 X.885 Y.6143
Z-.0875 F3.1515
X.9033 Y.3802 F12.606
G02 X.904 Y.36 I-.2592 J-.0202
G01 Y-1.3671
G02 X.8988 Y-1.4189 I-.26 J0
G01 X.8577 Y-1.6211
Z-.125 F3.1515
X.8988 Y-1.4189 F12.606
G03 X.904 Y-1.3671 I-.2548 J.0518
G01 Y.36
G03 X.9033 Y.3802 I-.26 J0
G01 X.885 Y.6143
G00 Z.1
X1.8506 Y-1.6218
G01 Z-.05 F3.1515
Y-1.3718 F12.606
G02 X1.858 Y-1.2907 I.4525 J0
G01 X1.9263 Y-.9157
G03 Y-.0918 I-2.2611 J.4119
G01 X1.858 Y.2832
G02 X1.8506 Y.3643 I.4452 J.0811
G01 Y.6143
Z-.0875 F3.1515
Y.3643 F12.606
G03 X1.858 Y.2832 I.4525 J0
G01 X1.9263 Y-.0918
G02 Y-.9157 I-2.2611 J-.4119
G01 X1.858 Y-1.2907
G03 X1.8506 Y-1.3718 I.4452 J-.0811
G01 Y-1.6218
Z-.125 F3.1515
Y-1.3718 F12.606
G02 X1.858 Y-1.2907 I.4525 J0
G01 X1.9263 Y-.9157
G03 Y-.0918 I-2.2611 J.4119
G01 X1.858 Y.2832
G02 X1.8506 Y.3643 I.4452 J.0811
G01 Y.6143
G00 Z.1
X2.0431
G01 Z-.05 F3.1515
Y.3643 F12.606
G03 X2.0473 Y.3177 I.26 J0
G01 X2.1157 Y-.0573
G02 Y-.9502 I-2.4505 J-.4464
G01 X2.0473 Y-1.3252
G03 X2.0431 Y-1.3718 I.2558 J-.0466
G01 Y-1.6218
Z-.0875 F3.1515
Y-1.3718 F12.606
G02 X2.0473 Y-1.3252 I.26 J0
G01 X2.1157 Y-.9502
G03 Y-.0573 I-2.4505 J.4464
G01 X2.0473 Y.3177
G02 X2.0431 Y.3643 I.2558 J.0466
G01 Y.6143
Z-.125 F3.1515
Y.3643 F12.606
G03 X2.0473 Y.3177 I.26 J0
G01 X2.1157 Y-.0573
G02 Y-.9502 I-2.4505 J-.4464
G01 X2.0473 Y-1.3252
G03 X2.0431 Y-1.3718 I.2558 J-.0466
G01 Y-1.6218
G00 Z.1
X1.719 Y-.8812
G01 Z-.05 F3.1515
G02 I-.335 J0 F12.606
G01 Z-.0875 F3.1515
G03 I-.335 J0 F12.606
G01 Z-.125 F3.1515
G02 I-.335 J0 F12.606
G00 Z.1
Y-.1262
G01 Z-.05 F3.1515
G02 I-.335 J0 F12.606
G01 Z-.0875 F3.1515
G03 I-.335 J0 F12.606
G01 Z-.125 F3.1515
G02 I-.335 J0 F12.606
G00 Z.1
Z1.
X1.459 Y-.8812
Z.1
G01 Z-.025 F3.1515
G02 I-.075 J0 F12.606
G00 Z.1
Z1.
Y-.1262
Z.1
G01 Z-.025 F3.1515
G02 I-.075 J0 F12.606
G00 Z.1
Z1. M09
G91 G28 Z0
G90

M01
T12 M06 (1/4 EM CRB3FL 3/4 LOC)
( Contour Mill3 )
S4073 M03
G90 G54 G17 G00 X2.1289 Y-1.0767
M08
G43 H12 Z1.
Z.1
G01 Z-.125 F5.7022
G41 D12 X2.2359 Y-1.0027 F17.1066
G03 X2.2462 Y-.9867 I-.0142 J.0206
G01 X2.2485 Y-.9744 F22.8088
G03 Y-.0331 I-2.5833 J.4706
G01 X2.2462 Y-.0208
G03 X2.2359 Y-.0048 I-.0246 J-.0045
G40 G01 X2.1289 Y.0692
G00 Z.1
Z1.
( Contour Mill4 )
X.8683 Y.1071
Z.1
G01 Z-.125 F6.0275
G41 D12 X.7764 Y.0152 F18.0825
G03 X.769 Y-.0025 I.0177 J-.0177
G01 Y-1.002 F24.11
G03 X.7764 Y-1.0197 I.025 J0
G40 G01 X.8683 Y-1.1116
G00 Z.1
Z1.
( Contour Mill2 )
X1.5121 Y-.4181
Z.075
G01 Z-.125 F6.0275
G41 D12 X1.4146 Y-.3321 F18.0825
G03 X1.3965 Y-.3259 I-.0165 J-.0187
G02 X1.384 Y-.3262 I-.0125 J.1996 F24.11
I0 J.2
X1.3716 Y-.3259 I0 J.2
G03 X1.3535 Y-.3321 I-.0016 J-.025
G40 G01 X1.256 Y-.4181
G00 Z.075
Z1.
X1.5121 Y-1.1731
Z.075
G01 Z-.125 F6.0275
G41 D12 X1.4146 Y-1.0871 F18.0825
G03 X1.3965 Y-1.0809 I-.0165 J-.0187
G02 X1.384 Y-1.0812 I-.0125 J.1996 F24.11
I0 J.2
X1.3716 Y-1.0809 I0 J.2
G03 X1.3535 Y-1.0871 I-.0016 J-.025
G40 G01 X1.256 Y-1.1731
G00 Z.075
Z1. M09
G91 G28 Z0
G90

 

[BT Fabrication]

I remember seeing a video about this, it was a setting in the control that allows it to use cutter comp, and needs commands to turn it on and off. I wish I could remember what video that was on youtube for haas. had it in a tip of the day or something. if I find it, I will post it.

 

[Nerdlinger]

It doesn’t look like you are using cutter comp on T11 roughing, but that’s normal. Is the part already to size so maybe T12 needs to be offset by more to SEE the effect? I doubt it since you are trying to make a negative offset change but just a thought. You ARE adjusting offset “12”, right?

 

[bcj2]

Could it need a little more lead in length

 

[EMTech]

If the code is acting differently in the two machines, I would recommend checking settings.

The first one to check would be Setting 40 Radius or Diameter. This will control if your machine reads the tool compensation value as radius or diameter.

What are your machines currently set at?