Looking for 4th axis for my old VMC. It needs a 2" through-hole. It is for a YCM Supermax Rebel Mitsubishi Meldas machine, but I understand this is obscure!
I will consider anything I can modify to suit my needs. Old and obsolete controls are fine too. The main objective is to find something in mechanically good shape.
I'll even settle with a manual unit if I have to as long as it's in good mechanical condition.
I will consider anything I can modify to suit my needs. Old and obsolete controls are fine too. The main objective is to find something in mechanically good shape.
I'll even settle with a manual unit if I have to as long as it's in good mechanical condition.