What's new
What's new

WTS: EDM vises, 2J & DA100 collets, large Jacobs chucks, Morse tooling

paroikoi

Aluminum
Joined
Oct 2, 2014
Location
Jonesboro, AR, USA
Up for sale are the following (see bottom for link to photos):

3 used toolmaker vises. None of them have any markings indicating who made them. $199 shipped for the lot.

Various 2J collets, 13 total. Sizes included are 1x 9/16", 2x 3/4", 2x 13/16", 2x 7/8", 4x 15/16", and 2x 1". One is Modern brand, two have unreadable manufacturers, and the rest are Hardinge. $110 plus actual shipping. Please note that a few have been sold since the photos (see below) were taken. The list above is current.

Various DA100 collets, 10 total. Sizes included are 1/8", 1/4", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", and 9/16". $40 plus actual shipping.

Used Jacobs No. 20 (not 20N) Super Chuck on MT6 shank. Capacity is 3/8" to 1". I don't know the difference between this and a 20N, but the patent date on this is 1902, so it's been around a while. No key is included. $60 plus actual shipping.

Used Jacobs chuck on MT6 shank. Capacity is 1/8" to 3/4". The model is No. 4 or 40 something; I can't tell if there's an extra digit after the 4. No key is included. $40 plus actual shipping.

Large shell mill cutter. HSS, made by U.S. Tool. 3-3/4" diameter, just under 2-3/8" high, 3/8" corner radius, 1.5" bore. $40 plus actual shipping.

Various drill bushings, 18 total. Sizes range from 11/32" to 2". $25 plus actual shipping.

MT5 Weldon end mill holder, or at least that's what I think it's for. 1" bore. $12 plus actual shipping.

MT5 boring bars. No cutters included. $15 each or $25 for the pair, plus actual shipping.

MT5 shell mill arbors. $10 each or $25 for all 3, plus actual shipping.

Various MT5 & MT6 Morse taper adapters. $15 each individually or $10 each if you buy at least 3, plus actual shipping.


I listed these before quite some time ago but wanted to lower prices & consolidate the ads. There are photos of all the above in my previous ads here:

WTS: EDM vises and Trav-a-dial
WTS: Sjogren 2J speed chucks & collets, DA10 collets, drill chucks, Morse stuff, etc.
 
Last edited:

stevewatr

Stainless
Joined
Aug 9, 2013
Location
Worcester County, Massachusetts
Your links are not working (or at least they are not working for me).

But i found your old posts and saw the pictures of the vises. Those look like regular toolmaker vises. Are they stainless steel?
8160bb4b1f3f36cf882ed7f1247745cf.jpg
 

paroikoi

Aluminum
Joined
Oct 2, 2014
Location
Jonesboro, AR, USA
Thanks for setting me straight. I guess my ignorance is showing, as I'm not calling them the right thing. They all have mild scattered surface rust & discoloration, so I'm guessing they're not stainless.

Now that I know what these are really called, I see that my price was too high. I've lowered it accordingly.
 








 
Top