paroikoi
Aluminum
- Joined
- Oct 2, 2014
- Location
- Jonesboro, AR, USA
WTS: Sjogren 2J speed chucks & collets, DA10 collets, drill chucks, Morse stuff, etc.
Hardinge-Sjogren D1-6 2J collet chuck with 20 2J collets. Collets included are 1/8" through 1-1/8" by 16ths plus 15/32", 1-1/4", and 1-3/8". $450 plus actual shipping.
Hardinge-Sjogren D1-3 2J collet chuck with 14 2J collets. Collets included are 3/16", 1/4", 5/16", 7/16", 15/32", 9/16", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", and 1-1/8". $300 plus actual shipping.
Various 2J collets, 18 total. Sizes included are 1x 3/16", 2x 7/16", 3x 3/4", 3x 13/16", 2x 7/8", 5x 15/16", and 2x 1". $150 plus actual shipping.
Various DA10 collets, 10 total. Sizes included are 1/8", 1/4", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", and 9/16". $50 plus actual shipping.
Used Jacobs No. 20 (not 20N) Super Chuck on MT6 shank. Capacity is 3/8" to 1". I don't know the difference between this and a 20N, but the patent date on this is 1902, so it's been around a while. No key is included. $75 plus actual shipping.
Used Jacobs chuck on MT6 shank. Capacity is 1/8" to 3/4". The model is No. 4 or 40 something; I can't tell if there's an extra digit after the 4. No key is included. $50 plus actual shipping.
Large shell mill cutter. HSS, made by U.S. Tool. 3-3/4" diameter, just under 2-3/8" high, 3/8" corner radius, 1.5" bore. $50 plus actual shipping.
Various drill bushings, 18 total. Sizes range from 11/32" to 2". $30 plus actual shipping.
MT5 Weldon end mill holder, or at least that's what I think it's for. 1" bore. $15 plus actual shipping.
MT5 boring bars. No cutters included. $20 each or $30 for the pair, plus actual shipping.
MT5 shell mill arbors. $15 each or $40 for all 3, plus actual shipping.
Various MT5 & MT6 Morse taper adapters. $20 each or $10 each if you buy at least 3, plus actual shipping.
Here are photos of the D1-6 Sjogren chuck:
See posts below for photos of the other stuff. I can email or text larger photos if need be.
I'm also willing to trade these for various things I need such as certain 2J collets, CXA tool holders, a boring head I can use on my Van Norman #12 (I have a boring head adapter), boring bars for same, a Jarno #12 or #13 dead center, a 6" or 8" rotary table for my VN12 (needs to do both horizontal and vertical), a VN12 dividing head, a VN12 high speed head (I don't recall the specific name, but the attachment that has a built-in quill), or a 5HP VFD.
Hardinge-Sjogren D1-6 2J collet chuck with 20 2J collets. Collets included are 1/8" through 1-1/8" by 16ths plus 15/32", 1-1/4", and 1-3/8". $450 plus actual shipping.
Hardinge-Sjogren D1-3 2J collet chuck with 14 2J collets. Collets included are 3/16", 1/4", 5/16", 7/16", 15/32", 9/16", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", and 1-1/8". $300 plus actual shipping.
Various 2J collets, 18 total. Sizes included are 1x 3/16", 2x 7/16", 3x 3/4", 3x 13/16", 2x 7/8", 5x 15/16", and 2x 1". $150 plus actual shipping.
Various DA10 collets, 10 total. Sizes included are 1/8", 1/4", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", and 9/16". $50 plus actual shipping.
Used Jacobs No. 20 (not 20N) Super Chuck on MT6 shank. Capacity is 3/8" to 1". I don't know the difference between this and a 20N, but the patent date on this is 1902, so it's been around a while. No key is included. $75 plus actual shipping.
Used Jacobs chuck on MT6 shank. Capacity is 1/8" to 3/4". The model is No. 4 or 40 something; I can't tell if there's an extra digit after the 4. No key is included. $50 plus actual shipping.
Large shell mill cutter. HSS, made by U.S. Tool. 3-3/4" diameter, just under 2-3/8" high, 3/8" corner radius, 1.5" bore. $50 plus actual shipping.
Various drill bushings, 18 total. Sizes range from 11/32" to 2". $30 plus actual shipping.
MT5 Weldon end mill holder, or at least that's what I think it's for. 1" bore. $15 plus actual shipping.
MT5 boring bars. No cutters included. $20 each or $30 for the pair, plus actual shipping.
MT5 shell mill arbors. $15 each or $40 for all 3, plus actual shipping.
Various MT5 & MT6 Morse taper adapters. $20 each or $10 each if you buy at least 3, plus actual shipping.
Here are photos of the D1-6 Sjogren chuck:
See posts below for photos of the other stuff. I can email or text larger photos if need be.
I'm also willing to trade these for various things I need such as certain 2J collets, CXA tool holders, a boring head I can use on my Van Norman #12 (I have a boring head adapter), boring bars for same, a Jarno #12 or #13 dead center, a 6" or 8" rotary table for my VN12 (needs to do both horizontal and vertical), a VN12 dividing head, a VN12 high speed head (I don't recall the specific name, but the attachment that has a built-in quill), or a 5HP VFD.