What's new
What's new

WTS/WTT: Aloris CXA tool post and 11 holders - all US-made

paroikoi

Aluminum
Joined
Oct 2, 2014
Location
Jonesboro, AR, USA
Up for sale is a used Aloris CXA tool post with 11 US-made CXA tool holders. 7 of the tool holders are Aloris, the other 4 are DTM. The tool holders are as follows: 2x Aloris CXA-13, 1x Aloris CXA-7 parting tool holder with HSS blade, 2x Aloris CXA-2, 2x Aloris CXA-1, 3x DTM H90-1A (equivalent to Aloris CXA-1), and 1x modified DTM H90-1A (e.g., Aloris CXA-1) with slot milled taller to allow it to hold a 1" tool. This last tool holder also includes a 1" tool as shown in the photos (the tool was 1.25" but has been milled down to fit the holder). The tool post includes the mounting stud & top nut, but no T-nut. The tool post is missing it's red Aloris ID plate but clearly has the Aloris logo on it. The tool post and some of the holders have mild surface rust or mild damage here or there. Everything works great.

$999 plus actual shipping or I'll trade for/toward things I need: Multifix size E tool holders, a 5/16" 2J collet, a D1-3 4-jaw chuck (either a Monarch 10EE "lightweight" Cushman or a regular 6"), Monarch 10EE square dial metric change gears, a Monarch 10EE square dial follower rest, or specific 5C collets (hex or square collets, step collets, round collets smaller than 1/16", or maybe a set of 5C collets by 16ths or 32nds).

PXL_20210814_200142375.jpg
PXL_20210814_200159087.jpg
PXL_20210814_200227917.jpg
PXL_20210814_200432912.jpg
PXL_20210814_200459897.jpg
 
i have a 10ee steady rest from a square dial if you are interested in a trade
send me a PM with a phone number. I have some d1-3 chucks too
 
was probably $1000 new at the time. used id say $400-500

That's not in keeping with eBay prices. I've already been offered on eBay what I'm selling it for here, but I would net less than that due to eBay fees. So, I have it listed for higher on eBay. Look at sold prices on eBay. My price is not out of touch with reality.
 








 
Back
Top