paroikoi
Aluminum
- Joined
- Oct 2, 2014
- Location
- Jonesboro, AR, USA
Up for sale or trade are the following:
Hardinge Sjogren 2J D1-6 speed chuck with 24 2J collets. Good condition and works great. Includes set of 21 2J collets from 1/8" to 1-3/8" by 16ths. All the included collets are Hardinge except for the 13/16" which is Rivett and the 1-3/16" which is Buck. Also includes 3 shop-modified 2J collets: a 1-1/4" round, 1-5/8" round, and 1/2" hex. $499 plus actual shipping (less than I have into it). If it matters to you, I have a Hardinge 13/16" 2J collet below I could swap with the Rivett.
Lot of 14 Hardinge metric 2J collets. 6mm through 20mm by 1mm except no 14mm collet. $499 plus shipping.
Lot of 19 2J collets. This is almost a full set from 3/16" to 1-3/8" by 16ths, except that no 5/16" collet is included. Good condition overall, but some have minor damage that shouldn't affect use. All are Hardinge except the 1-3/8" collet, which was made by Balas. $349.
Hardinge metric 6mm 2J collet. $35.
Various 2J collets in good condition. Various brands. 7/16", 1/2", 11/16", 3/4" (qty 2), 13/16", 15/16" (qty 3), 31/32", 1-1/8" (qty 2), 1-1/4", 1-3/8". $13 each.
Various 2J collets in fair condition. Various brands, some unreadable. All have more damage or wear than the "good" condition collets above. 9/16", 3/4", 13/16", 7/8" (qty 2), 15/16" (qty 2), 1", 1-5/16". $10 each.
Various other 2J collets in good condition. Hardinge 5/32", 15/64", 9/32", 25/64", 13/32", 15/32", 33/64", 19/32", 49/64", 1-17/64". Modern brand 1.100", may be shop-modified. Shop-modified 3/8" and 1/2" hex. All these are $15 each.
I can provide more photos on request. Note that the list of individual collets above should be correct, but the photos show more than are available as some have been sold since I took the photos.
None of the prices above include shipping, but I will combine shipping and only charge actual cost.
Trades I'm interested in include an Aloris or Dorian BXA tool post or holders, a 5/16" 2J collet (to complete the set above), a D1-3 4-jaw chuck (either a 10EE "lightweight" Cushman or a regular 6"), 10EE square dial metric change gears, a 10EE square dial follower rest, an MT2 live center, and MT2 dead center, or specific 5C collets (hex or square collets, step collets, or round collets smaller than 1/16").
Hardinge Sjogren 2J D1-6 speed chuck with 24 2J collets. Good condition and works great. Includes set of 21 2J collets from 1/8" to 1-3/8" by 16ths. All the included collets are Hardinge except for the 13/16" which is Rivett and the 1-3/16" which is Buck. Also includes 3 shop-modified 2J collets: a 1-1/4" round, 1-5/8" round, and 1/2" hex. $499 plus actual shipping (less than I have into it). If it matters to you, I have a Hardinge 13/16" 2J collet below I could swap with the Rivett.
Lot of 14 Hardinge metric 2J collets. 6mm through 20mm by 1mm except no 14mm collet. $499 plus shipping.
Lot of 19 2J collets. This is almost a full set from 3/16" to 1-3/8" by 16ths, except that no 5/16" collet is included. Good condition overall, but some have minor damage that shouldn't affect use. All are Hardinge except the 1-3/8" collet, which was made by Balas. $349.
Hardinge metric 6mm 2J collet. $35.
Various 2J collets in good condition. Various brands. 7/16", 1/2", 11/16", 3/4" (qty 2), 13/16", 15/16" (qty 3), 31/32", 1-1/8" (qty 2), 1-1/4", 1-3/8". $13 each.
Various 2J collets in fair condition. Various brands, some unreadable. All have more damage or wear than the "good" condition collets above. 9/16", 3/4", 13/16", 7/8" (qty 2), 15/16" (qty 2), 1", 1-5/16". $10 each.
Various other 2J collets in good condition. Hardinge 5/32", 15/64", 9/32", 25/64", 13/32", 15/32", 33/64", 19/32", 49/64", 1-17/64". Modern brand 1.100", may be shop-modified. Shop-modified 3/8" and 1/2" hex. All these are $15 each.
I can provide more photos on request. Note that the list of individual collets above should be correct, but the photos show more than are available as some have been sold since I took the photos.
None of the prices above include shipping, but I will combine shipping and only charge actual cost.
Trades I'm interested in include an Aloris or Dorian BXA tool post or holders, a 5/16" 2J collet (to complete the set above), a D1-3 4-jaw chuck (either a 10EE "lightweight" Cushman or a regular 6"), 10EE square dial metric change gears, a 10EE square dial follower rest, an MT2 live center, and MT2 dead center, or specific 5C collets (hex or square collets, step collets, or round collets smaller than 1/16").