What's new
What's new

WTT or FS: D1-8 Pins

aribert

Cast Iron
Joined
Jul 2, 2008
Location
Metro Detroit, MI
I bought a cabinet of stuff at auction and included in it were a set of D8-1 pins (if only they were D1-6 pins). Pins are 1.0 inch dia with 3/4-16 threads. Trade for a set of D1-6 pins or sell for $40 + $10 USPS flat rate shipping. Payment via PayPal or check/MO. Will gladly take a check/MO but will hold shipment till check/MO has cleared.SAM_7766.JPGSAM_7767.JPGSAM_7769.JPG
 
Last edited:

aribert

Cast Iron
Joined
Jul 2, 2008
Location
Metro Detroit, MI
Thank you for digging up the pins so promptly. Rust/dirt is not an issue. Is the body diameter 7/8 of an inch - visually the body does not look to be that much greater than the 5/8 thds - wondering if the pins might be D1-5?
 

mattthemuppet

Stainless
Joined
Apr 22, 2016
Location
San Antonio
that took a bit longer than expected - pins are 7/8" diameter, 1-15/16" long on the unthreaded pin part, and 5/8-18 tpi (though they could be a metric equivalent, I'm not an expert)
 








 
Top