What's new
What's new

Yama Seiki AV-610 4th issues!!

secondops

Plastic
Joined
May 4, 2022
We recently purchased a nikken CNC 180 rotary table for our 2012 Yama Seiki with Fanuc Oi-MD control. We installed the motor and amp suggested by nikken to install in rotary. We purchased the cables from Yama needed from the table to the amp and etc. We enabled all the setting nikken told us to and Yama as well. We are know getting a SV5136 FANUC error. It says number of amps insufficient. We have reached out to Yama but not very helpful. Any suggestions? Here is my layout below and I attached photos.
Fanuc motor A06B-0205-B000
Fanuc amp for 4th A06B-6117-H103
Thanks in advance
 

Attachments

  • IMG_20220529_160035.jpg
    IMG_20220529_160035.jpg
    174.2 KB · Views: 5
  • IMG_29052022_161639_(1080_x_1080_pixel).jpg
    IMG_29052022_161639_(1080_x_1080_pixel).jpg
    356.8 KB · Views: 5
  • IMG_29052022_162009_(1080_x_1080_pixel).jpg
    IMG_29052022_162009_(1080_x_1080_pixel).jpg
    240.2 KB · Views: 5








 
Top